Focusrite Saffire PRO 10 I/O FireWire Audio Interface B-Stock

A B-Stock is a like new, refurbished unit. It has been fully tested by the facotry to meet its original stardard with a seal of approval from the manufacturer. B-Stock unit has been made as close to new as possible. It comes with the same warranty as a brand new unit. Most of B-Stock units comes with brand new manual, software (CD) and accessories.

Focusrite Saffire Pro 10 I/O Firewire audio interface with 8-preamps, 8-balanced outputs, S/PDIF, Saffire control pro software.

Focusrite Saffire Pro 10 i/o FireWire audio interface features the same Green Series preamps and converters as the Saffire PRO 26 i/o interface, Focusrite Saffire Control Pro highly integrated I/O and moniotring control software, and the option to create addition inputs and outputs by aggregating up to three Saffire PRO 10 i/o interfadces while controlling them from the same control platform. And Saffire PRO 10 i/o and Saffire PRO 26 i/o can be run together. Also Saffire PRO can be used in standalone mode to record or mix without a computer once the desired mode has been chosen in SaffireControl PRO software.

Focusrite Saffire Pro 10 i/o combines eight channels of Focusrite Green Series preamplification with slectable XLR (with software switchable +48V phantom power on Inputs 1-4 and 5-8) or 1/4-inch TRS inputs, eight balanced line outputs and stereo S/PDIF I/O in a 19" rackmount case. The Saffire Pro 10 i/o offers two channels of DI instrument inputs for electric guitars and basses. The front panel includes two independent headphone outputs with volume control. All analogue inputs, outputs and S/PDIF inputs and outputs can be run simultaneously at 44.1/48kHZ. The Saffire PRO 10 i/o can be either FireWire bus powered off a standard 6-pin FireWire port or via an external power supply, and has been designed to take advantage of the external PSU and to maximize performance when powered in this way. Saffire Pro 10 i/o also features 16-channels of MIDI I/O.

Saffire Pro 10 i/o comes bundled with Focusrite's Compression, Reverb, Amp Sim guitar amp modelling, and EQ VST/AU plug-ins for use in the mix. SaffireControl PRO software provides a Mix section where all 10 input levels can be set, controls for setting the sample rate, synching the hardware to an external source, and level controls for all outputs. SaffireControl PRO can be shrunk down and be made to float over the top of the sequencer, so settings can be easily viewd or editied.

Saffire PRO 10 i/o is compatible with Windows XP and Mac OSX (Intel compatible), and will work with all ASIO and Core Audio compatible software.

Focusrite Saffire Pro 10 Features

Eight input channels of Focusrite pre-amplification

Eight balanced line outputs

Stereo S/PDIF Input/Output

FireWire Bus 400 powered or external PSU

MIDI I/O

Ships bundled with Focusrite compression, reverb, amp modeling, and EQ VST/AU plug-ins for use in the mix

SaffireControl PRO Input/Output and monitoring control software

Focusrite Saffire Pro 10 Specifications

Mac

OS X Panther 10.3.3 or later
G4/800MHz
256MB RAM

PC

Windows XP
Pentium Celeron or Pentium compatible processor of 900MHz
256MB RAM