| Subtotal: $0.00 | Items In Cart: 0 | View Cart | Order Status | My Account |
Lexicon Ionix IO42 U42S USB 2.0 Recording Audio Interface
Lexicon Ionix U42Srecording interface fits where it makes the most sense, between your keyboard and monitor. Lexicon understands you care passionately about your music, and that it's more than just a pastime, which inspired them to create the IONIX U42S, putting all monitor and input level controls at your fingertips.Featuring newly designed dbx microphone preamps on every channel, the IONIX series recording interfaces are more than equipped to provide professional recordings that keep your music sounding its best. The preamps run on a high-voltage supply to guarantee stability and provide you with a superior recording across a wide dynamic range. Performance driven A/D - D/A converters ensure pristine 24-bit/96kHz audio to capture every subtle detail of your performance. The included Pantheon II VST/AU reverb plug-in features 6 reverb types with 16 adjustable parameters, as well as 35 factory presets that range from Vocal to Live Sound and Special Effects. It's easy to complete your mix and make your music sound its best with these exquisitely rich, full reverbs that have made Lexicon famous. Also included with the Lexicon U42S is a software suite featuring Steinberg's Cubase LE4 and Toontrack EZdrummer Lite. Features USB 2.0 connection to DAW (up to 480Mbps) 44.1 to 96KHz sample rates, 24-bit resolution 4 Analog 1/4" and XLR combi-jack inputs on the rear panel for mic/line inputs Record up to 6 sources at once 2 Analog 1/4" TRS (Stereo Main) outputs dbx high-voltage, ultra-low noise mic preamp's on all analog mic/line inputs (4 total) 2 Hi-Z instrument inputs Supports Windows and Mac platforms 48V phantom power for each input pair Input signal metering via 8 LED's per channel Signal mixing and stereo bus signal metering 2 1/4" high-output headphone connections MIDI In/Out S/PDIF I/O Zero-latency monitoring Low-latency ASIO drivers Lexicon Pantheon II VST/AU reverb plug-in Software suite includes Steinberg's Cubase LE4, and Toontrack EZdrummer Lite Specification
Input Impedance: 3k balanced Phantom Power: +48 Volts Maximum gain: +55dB E.I.N. (at max gain): 127dB @ 55dB gain typical (150 source), 130dB @ 55dB gain typical A-weighted (150 source) Maximum Input Level: +8dBu Frequency Response: +/ 1.5dB, 20Hz-20kHz THD+N: <0.02%, 20Hz-20kHz, <0.002%, 1kHz, -6dBu Line Inputs: 1/4" TRS balanced or unbalanced Input Impedance: 20k balanced, 13k unbalanced Maximum Input Level: +18dBu Frequency Response: +/ 1.5dB, 20Hz-20kHz THD+N: <0.02%, 20Hz-20kHz, <0.002%, 1kHz, +18 dBu Instrument Input: 1/4" TS unbalanced Input Impedance: 1M Maximum Input Level: +10dBu Frequency Response: +/ 2.5 dB, 20Hz-20kHz THD+N: <0.08%, 1kHz, +4dBu Line Outputs: 1/4" TRS balanced or unbalanced Level: +18dBu maximum Impedance: 32 Balanced, 16 Unbalanced Headphone Output: 1/4" stereo jack 250mW per channel at 50 MIDI Interface: 5-pin DIN connectors for MIDI in and MIDI out Sample Rate: 44.1, 48, 88.2, or 96kHz (determined by computer application) Dynamic Range: A/D (24 Bit) 108dB typical, A-weighted, 20HZ-20kHz D/A (24 Bit) 110dB typical, A-weighted, 20Hz-20kHz A/D/A (24 Bit) 106dB typical, A-weighted, 20Hz-20kHz Power requirements: Power adaptors for 100 240 VAC, 50/60Hz, 15W |













