| Subtotal: $0.00 | Items In Cart: 0 | View Cart | Order Status | My Account |
RME Hammerfall DSP MADI PCI Audio Interfaces
RME Hammerfall DSP MADIis both inexpensive and outstanding PCI card with MADI interface. MADI, the professionals' multi-channel audio interface, offers 64 channels of 24 bit audio at a sample rate of up to 48 kHz and 32 channels at up to 96 kHz. Transmission is done via a single line, either coaxial with BNC plugs or with fiber cable. In both cases more than 100 m cable length can be achieved. Hammerfall DSP is fully compatible to all devices with MADI interface. Hammerfall DSP MADI is based on the award-winning Hammerfall DSP technology, and represents the top model of this world-wide successful card line.Hammerfall DSP MADI offers full support for 56 and 64 channel modes and double and single wire technology (96k frame) for 96 kHz. Full 64 channel support can also be found in the hardware mixer TotalMix. All 64 inputs and 64 playback channels can be routed and mixed to 64 physical outputs completely freely, which translates to a 8192 channel mixer. With RME, Hammerfall DSP MADI offers further sensible features. While most MADI-based devices require an additional word clock or AES line, the Hammerfall DSP MADI (like the ADI-648) uses SteadyClock™ to extract the reference clock at lowest jitter directly from the MADI signal, making long-distance connections even more convenient. RME firstly makes use of a configuration memory for the most important settings of the card. Instead of operating in a default mode on computer power-up until loading the driver, Hammerfall DSP MADI activates the last used sample rate, master/slave configuration and MADI format immediately when switched on. This eliminates disturbing noises and clock network problems during power-up or re-boot of the computer. Features 8 buffer sizes/latencies available: 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms, 186 ms ASIO zero CPU load technology: 0 (zero!)% CPU load when using ALL 128 channels! Automatic and intelligent master/slave clock control Enhanced Zero Latency Monitoring for latency-free submixes and perfect ASIO Direct Monitoring All settings changeable in realtime Clock modes slave and master Sync sources: MADI coaxial, MADI optical, word clock, internal Varipitch: by input signal or word clock Sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable (Sync/word clock) Output word clock: BNC, low-impedance driver stage, 4 Vpp into 75 Ohms, short-circuit-proof MIDI input and output: via four 5-pin DIN jacks Sample rate range: MADI: 32 kHz - 96 kHz, word clock: 27 kHz-105 kHz Jitter: < 1 ns, internal and all inputs Jitter sensitivity: PLL operates even at 100 ns Jitter without problems Input MADI optical, MADI coaxial (BNC), 2 x MIDI, word clock (BNC) Output MADI optical, MADI coaxial (BNC), 2 x MIDI, word clock (BNC), stereo analog line/phones Input word clock: BNC, Signal Adaptation Circuit (functional from 1.2 Vpp input signal), switchable termination Comes with DIGICheck: the ultimate measurement, analysis and test tool |














