| Subtotal: $0.00 | Items In Cart: 0 | View Cart | Order Status | My Account |
Shure Beta 98 H/C Clip-on Condenser Microphone
Shure Beta 98H/C is a cardioid, mini-condenser instrumental microphone with in-line preamplifier is designed to clearly capture the sounds of today's professional horn players. The pickup pattern of the Beta 98H/C provides high gain-before-feedback and excellent rejection of unwanted noise. With a high maximum sound pressure level (SPL), the Beta 98H/C is ready to handle the demands of brass and woodwind instruments, and is a strong performer for percussion applications. The transformerless preamplifier circuitry of the Beta 98H/C improves linearity across the full frequency range. In situations where phantom power is not available, the MX1-BP battery powered preamplifier will perform exceptionally. The integrated gooseneck and ratcheting swivel joint of the Beta 98H/C allows for easy microphone positioning and securing. Once the position is determined, the gooseneck angle brace ensures that the Beta 98H/C will stay in place during even the most active performances. Features Tailored frequency response for open, natural sound reproduction Compact, lightweight construction provides a low degree of visibility Interchangeable microphone cartridges are available: RPM108 - Cardioid cartridge RPM110 Supercardioid cartridge Gooseneck, ratcheting swivel joint, and gooseneck angle brace allow for optimum placement and fixed positioning Legendary Shure ruggedness and reliability Specification Transducer Condenser Polar Pattern Unidirectional (Cardioid) Frequency Response 20 Hz - 20 kHz Dynamic Range (Typical) 132 dB (2.5k Ohm Load) Signal-to-Noise Ratio 63 dB at 94 dB SPL (IEC 651) Maximum Input Sound Level 143.5 dB Power Requirements 11 to 52v DC Phantom Power, or (Use a Battery in the Optional MX1-BP Battery Powered Supply) Output Impedance 150 Ohms Output Connectors Tini Q-G Connector (from Microphone), XLR-3M Type (from Pre-Amp) Pad None Low Frequency Roll-Off None Applications Saxophone, Soprano Saxophone, Trombone, Trumpet, Drums (Toms) Dimensions .44" (11mm) Grille Face Diameter 1" (25mm) Grille Face to Back of the Head 6.68" (167mm) Top of the Head to Base of Gooseneck |










