Shure P2TRE2 Wireless Personal Monitor System

Shure P2TRE2 is a multi channel, 8 frequency UHF wireless monitoring system in the PSM 200 family, sold as a complete kit, consisting of the P2T transmixer, a combination transmitter and dual input mono mixer, the P2R receiver, and the E2 dual earpiece earphones. Wireless in-ear monitoring provides much more mobility on the stage, and effectively eliminates the need for stage monitors, thus offering the performers a much roomier stage, and a lower volume, feedback free environment for the house and monitor engineers. This uniquely designed, and budget conscious, hybrid system offers both wired and wireless connectivity to both performer and engineer.

The P2T transmixer provides the connector link to the house or monitor mixing console,supporting both balanced and unbalanced feeds. Compact, with accessible level controls and offering the input and routing capabilities of a small mixer, the transmixer also offers a respectable RF output for cleaner and more reliable reception on stage.

The P2R portable beltpack receiver is the personal onstage monitoring component of the PSM 200 wireless monitoring system. The P2R offers very lightweight, compact plastic construction, and is visually inconspicuous. The sound is clear and the reception reliable, and the unique addition of a 1/4" jack offers the performer wired connectivity to additional mix sources, such as a direct box or instrument processor.

The Shure E2 earphones provide an affordable and reliable earpiece solution for the PSM 200 series receivers or other receivers in the PSM family of in ear monitor systems. The E2 earpiece is ergonomically designed to optimize the acoustic reproduction of the driver, and a generous selection of foam and flex plastic sleeves, in small, medium and large sizes, assures a comfortable fit and maximum isolation.The E2 cable terminates to a standard stereo mini plug, gold plated and moisture resistant.

Dual Function Transmitter
P2T transmixer doubles as remote dual input audio mixer in a single unit; XLR Split Out connectors enable chain routing of multiple P2T's and pass signal unaffected by individual level settings

Front Panel Level Control
Sturdy volume knobs adjacent to inputs for quick access

Rack Mountable
Transmitter is a 1/2 space rack unit, rack kit included

Multi Channel
Multi Channel frequency support offers greater freedom from RF interference at operating locale

Channel Scan Mode
Enables monitoring and selection from receiver of clearest, interference free frequency at operating locale

Compact, Beltpack Receiver
Lightweight, miniature, and wireless; 1/4" input connector enables wired audio connectivity independent of transmitter; switchable wired only functionality available

Sealed, Isolating Earpiece
Replaces large, bulky stage monitors for clean stage appearance and increased mobility

P2TRE2 System
RF Carrier Frequency Range: 518-865 MHz, varies with country or locale

Selectable Channels: 8

Compatible Channels: 4

Operating Range: Up to 300 ft., will vary with RF activity in locale

Frequency Response: 30 HZ to 12 kHZ, (+0, -3 db re 1kHZ); varies with earpiece

Signal-to-Noise Ratio: 80 db typical

Channel Separation: No Note: This is a Mono system

P2T Transmixer
RF Output Power: 30 mW (+15 dBm), varies with country and locale

Frequency Selection: Push to Select button

Frequency Indicators: LED displays selected frequency, 1-8

Antenna: External 1/4 Wavelength, semi-rigid, permanently mounted

Audio Input Connectors: Combined 1/4" and XLR Left and Right support either balanced or unbalanced connectivity

Nominal Input Level: -25 dBu at 1/2 Volume

Maximum Input Level: -5 dBu at 1/2 Volume

Input Pad Switch: No

Phantom Power Protection: Yes, up to 52 VDC

Loop In/Out Connectors: No

Loop I/O Nominal Input Level: No

Loop I/O Maximum Input Level: No

Limiting: Built in, fixed threshold

Power Requirements: External PS 20 power supply, 120 Vac

Weight: 13 oz. (368.5 g)

Dimensions: 8.6 x 5.6 x 1.7" (218.44 x 142.24 x 43.18mm)

P2R Receiver

RF Indicator: LED

Channel Scan Mode: Available, enables monitoring of optimal available frequency at a given locale
Frequency Selection: Push Button select and increment

Antenna: Attached Flexible Whip

Power Requirements: 9 volt battery

Battery Life: 4 hours; varies according to volume level and type, quality and output level of earphones

Battery Status Indicator: Power LED blinks with 15 minutes or less of available power

Limiting: Built in, fixed threshold

Equalization: No

Personal Mix Control: HI or LO Gain switch and Volume knob

Weight: 3.52 oz. (99.8 g)

Dimensions: 4.809 x 2.875 x 1.251" (122.15 x 73.025 x 31.775mm)

E2 Earpiece

Transducer Type: Dynamic, 1 per ear

Sensitivity (0 VU): 105 dB SPL/mW

Impedance: 16 Ohms

Cable Length: 62" (1.57 m) Connector Type Gold plated stereo mini plug, 1/8 inch

Weight: 1 oz. (30g)

• Number of Reviews:  ( 0 )
• Share your thoughts with other customers on Shure P2TRE2 Wireless Personal Monitor System.
• Write Your Buying Experience