| Subtotal: $0.00 | Items In Cart: 0 | View Cart | Order Status | My Account |
Yamaha MSR400 2-Way Active PA Loudspeaker
Yamaha MSR400is a bi-amplified 2-way system, featuring 400 watts maximum burst power that drives the 12" cone woofer and 1.75" compression driver. Yamaha MSR400 feature punchy bass and exceptionally clear midrange that delivers vocals with outstanding quality. Add as many pairs of MSR400s as you need used for a scalable main system or stage monitors. Frequency division is accomplished prior to the power amplifiers via a line-level electronic crossover. This eliminates the problems with loss, distortion, and phase that are normally unavoidable in conventional passive crossover networks. Another advantage of Yamaha MSR400 system is that power can be optimally assigned to the low-frequency and high-frequency drivers for optimum efficiency as well as smooth, natural balance across the entire audio spectrum.Yamaha MSR400 accepts nominal input levels ranging from -36 dB to +4 dB, meaning that you can directly connect any source from microphones to professional line-level gear. Three parallel-connected connectors are provided - two balanced XLR-type connectors and one balanced phone jack - that can be used as either inputs or parallel outputs. Yamaha MSR400 also features an input level control for matching with the source signal. Low and high EQ controls can be used to adjust the respective bands over a plus-or-minus 3dB range. Features Powered loudspeakers for matched components without the hassle Clear, clean highs and mids plus full bass Bi-amped system with phase-accurate crossover design Connect almost any source without fear! Easy to set up alone or with sub Specification Yamaha MSR400 Bi-amplified system with 12" woofer and 1.75" high-frequency driver Frequency Response 50Hz-20kHz Maximum SPL 121dB (@1 meter) Dispersion 90¡ã (H), 40¡ã (V) Bass reflex enclosure Output power 225 watts LF, 75 watts HF Burst Power 400W total Inputs XLR, 1/4" TRS Level control EQ: Low +/- 3dB at 55Hz, High +/- 3dB at HF Power Switch with LED indicator Red LED clipping indicator Dimensions (W x H x D) 16" x 25-3/4" x 13-7/8" Weight 50.7 lbs |














