| Subtotal: $0.00 | Items In Cart: 0 | View Cart | Order Status | My Account |
Audio-Technica AT2022 X/Y Stereo Electret Condenser Microphone
Audio-Technica AT2022condenser microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and 0.5 m cable that terminates in a 3.5 mm stereo plug. The AT2022 is designed to capture instruments, ambiance, vocals and performances in stereo. There are two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90°) or wide (120°) stereo operation and fold flat for storage as well as transportation.Features X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility Provides the spatial impact and realism of a live sound field Battery operation allows use with most recording devices Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise User-selectable 90° or 120° stereo operation for narrow or wide pickup patterns Ideal for general stereo recording and field sound capture Excellent channel separation Included fuzzy windscreen offers excellent wind protection Specification Elements: Fixed-charge back plate, permanently polarized condenser Polar Pattern: X/Y Stereo Frequency Response: 20–20,000 Hz Low Frequency Roll-off: 150 Hz, 6 dB/octave Open Circuit Sensitivity: -41 dB (8.9 mV) re 1V at 1 Pa Channel Balance: <2.5 dB Impedamce: 200 ohms Maximum Input Sound Level: 122 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range (typical): 103 dB, 1 kHz at Max SPL Signal-to-Noise Ratio: 75 dB, 1 kHz at 1 Pa Battery Type: 1.5V AA/UM3 Warning: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result. Battery Current / Life: 1.2 mA / 500 hours typical (alkaline) Switch: Off, on/flat, on/roll-off Weight: 270 g (9.5 oz) Dimensions: 192.0 mm (7.56") long, 65.0 mm (2.56") maximum head diameter, 21.0 mm (0.83") body diameter Output Connector: Integral 3-pin XLRM-type Cable: 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch |













