Lexicon Lambda Studio Bundle EM-1A w/Cable, Windscreen & Shock Mount
Lexicon LambdaUSB Audio Interface. There is no easier way to get into desktop recording! Just add a microphone, computer and musical inspiration. Anywhere you can lug your laptop, Lexicon Lambda lets you record both a vocal track and an accompanying instrument at the same time (or two singers/ two instruments). Lexicon Lambda Studio has two studio- quality balanced microphone inputs with phantom power for professional condenser microphones and TRS inserts that let you add outboard equipment such as compressors or equalizers. Two line level inputs are provided by Lexicon Lambda Studio for adding keyboards, drum machines, turntables* or pre-recorded backing tracks from CD or MP3 players. A separate front-panel high-impedance input is included by Lexicon Lambda Studio so you can plug your electric guitar or bass right in. Via the separate headphone jack, you can monitor as you record, listen to a backing or click track while recording or hear tracks played back from your computer. Balanced analog line outputs let you connect to powered monitor speakers or a mastering deck.
Five Inputs: Record up to two tracks at once!
Professional large diaphragm studio condenser microphone. Comes with cable, windscreen, and shock mount. Perfect for recording studios, broadcasting and stage performance.
Separate mic and line level input controls with individual peak indicators.
Monitor mix control for balancing an audio source between live input and playback mix level while recording. Can be switched to stereo or mono.
2-channel, 4-segment bargraph meter to monitor exact levels of the analog-to-digital converters.
Lexicon Lambda Studio's high-powered headphone amp offers ultra-clear fidelity while delivering ample power for any type of headphones.
RF-filtered and TRS balanced Line outputs for monitoring through powered speakers or recording to an analog source such as a cassette deck.
TRS inserts let you add your favorite outboard processors to either mic input channel.
Professional Condenser Microphone
High Quality Back Electret Condenser
Perfect Circuit Deisgn & Transformer Output
Low Nooise, Wide Dynamic Range, And Strong Sound Pressure
Microphone Inputs (2) Female XLR Pin 2 Hot
Input Impedance 600 ohms balanced
Phantom Power +48 Volt
GAIN +44 dBu
EIN -115dB A-weighted @50dB gain (150 Ohm source impedance)
Maxium Input Level +4dBu
Frequency Response +0, -0.2 dB 20 Hz - 20 kHz, ref. 1 kHz
THD+N <.005%, 20 Hz - 20 kHz
Insert Inputs: (2) 1/4" TRS
Send Level (tip): +10 dBu maximum
Maximum Return Level (ring) +11 dBu maximum
Line Inputs (2) 1/4" TRS balanced or unbalanced
Input Impedance 20 kOhm balanced, 10 kOhm unbalanced
Maximum Input Level +22 dBu
Frequency Response +0, -0.2 dB 20 Hz - 20 kHz, ref. 1kHz
THD+N <.009% A/D, 20 Hz - 20 kHz
Instrument Input (1) 1/4" mono jack
Input Impedance 1 MOhm unbalanced
Maximum Input Level +8.5 dBu
Frequency Response +0, -0.25 dB 20 Hz - 20 kHz, ref. 1 kHz
THD+N <.0125% A/D
Line Outputs (2) 1/4" TRS balanced or unbalanced
Level +15 dBu maximum
Impedance 1 KOhm
Headphone Output (1) 1/8" stereo jack 100 mW per channel at 50 Ohms
MIDI Interface 5 pin DIN connectors for MIDI in and MIDI out
Sample Rate 44.1 kHz or 48 kHz (determined by computer application)
Dynamic Range A/D (24 Bit) 102 dB typical, A-weighted, 20 Hz - 20 kHz
D/A (24 Bit) 102 dB typical, A-weighted, 20 Hz - 20 kHz
A/D/A (24 Bit) 100 dB typical, A-weighted, 20 Hz - 20 kHz
Power Requirements USB powered
Dimensions 6.5 x 6.7 x 3.4
Weight 1.92 lbs.
Professional Condenser Microphone
Polar Pattern: Uni-Directional
Frequency Response: 20hz-20khz
Sensitivity: -45db + 3db
Output Impedance: 150 ohms +30% (at 1khz)
Load Impenance: >1000 ohms
Equivalent Noise Level: 16dBA
Current Consumption: 3mA
Be the first to Write a Review