Rane XP 2016S External Processor for MP2016S Mixer
Rane XP 2016Sis an optional external processor, designed specifically for use with Rane MP 2016S DJ mixer. It's intended to mount above or below the MP 2016S mixer. The XP 2016S connects with a single 10-inch ribbon cable and is engaged with the flip of a switch on the MP 2016S front panel. If the processor is not connected, its engage switch on the MP 2016S has no effect.
The XP 2016S offers dedicated Accelerated-Slope, 3-band, full-cut tone controls for each of the six Stereo Input channels, A-Post-B Crossfader Assign switches for all six Input channels, a high-performance Active Crossfader with full range Contour control, and a Stereo 10-segment Peak dBu Master/Cue Meter with Peak Hold.
In the MP 2016S mixer, the six Stereo, post Mix Level signals are fed to the XP 2016S. When the processor is not engaged, the post Mix Level signals go directly to the Master Mix in the mixer. When the XP 2016S is engaged, the Stereo Master Mix comes from the XP 2016S.
If all Input channels on the XP 2016S are assigned Post-Crossfader, the Mix will be identical to the MP 2016S (with the addition of tone controls for each Input Channel). For Crossfader control, simply Assign a Channel to the A or B side of the Crossfader. The Active Crossfader features a full-range Contour control for smooth blending or ultra fast cuts.
On the DJ mxier, the Master/Cue Meter follows the source selection of the Headphone monitor. If Master is selected, the XP 2016S Meter Monitors the pre-house-Level Master signal. If Cue is selected, the XP 2016S meter Monitors the Cue Source.
Six Accelerated Slope Tone Controls
Fader Contour Adjustment
Dimensions (WxHxD): 19 x 5.25 x 5.3" (48.26 x 13.37 x 13.47cm)
Weight: 11 lbs (4.99kg)
Be the first to Write a Review