RME Fireface 400 Firewire Audio Interface

RME Fireface 400

 is a multi-channel FireWire audio interface for use with both the Mac and Windows. RME Fireface 400 is not just the little brother of the RME Fireface 800 - RME Fireface 400 is a completely newly designed device. RME Fireface 400 is the only device in its class with active jitter suppression, stand-alone functionality, complete controllability from the front panel, highly flexible I/Os in professional quality, and an unsurpassed 648-channel matrix router - at sample rates up to 192 kHz

Item Includes

• RME Fireface 400 Firewire Audio Interface
• External Power Supply
• 13 ft FW400 Cable (IEEE1394a)
• 6.6 ft TOSLink Optical Cable
• MIDI Breakout Cable
• Driver CD ROM
• Two (2) Year Warranty

Portable
The Fireface 400 excells as portable all-in-one solution when it comes to power supply. The included switching power supply accepts voltages from 100 to 240 V, thus can be operated all over the world. A rear panel switch enables Bus Powered operation, taking the power directly from the FireWire connector. To avoid potential problems, both the unit's internal power supply and the protective circuits at the FireWire port were specially designed and thoroughly tested. Eight inputs and outputs (balanced, output 7/8 unbalanced) with software controlled switching of the reference levels (-10 dBV, +4 dBu, Lo/HiGain), of course realized discretely in the analog domain, guarantee highest dynamic range and highest fidelity.

DSP-based TotalMix mixer
The DSP-based TotalMix mixer allows fully independent routing and mixing of all 18 input and output channels to all 18 physical outputs. Up to 9 totally independent stereo sub-mixes simply mean unrivalled monitoring facilities. Copy/paste of routings, ganging and group-based operation of faders, and the extraordinary Matrix window are just some of the mixer's unique features. The mixer can be completely MIDI controlled, even in stand-alone operation. Furthermore the DSP hardware calculates RMS and Peak levels for all 54 audio channels, without causing any significant CPU load. A word clock input and output (BNC) plus two MIDI I/Os (breakout cable, 5-pin DIN) complete the analog/digital feature list and turn the Fireface 400 into an entire audio system of the highest quality.

Flexible I/O
The Fireface 400's front panel features 2 balanced mic inputs with a digitally controlled input stage, individually switchable 48V phantom power, and Neutrik Combo connectors for XLR and TRS. And also these can be used as additional line inputs. A pre amplification of up to 65 dB, adjustable in steps of 1 dB over a range of 55 dB, exceptional EIN performance even at low pre-amplification settings, and extremely low THD+N let these preamps surpass those of other devices that cost several times the price of the Fireface 400. All level settings are 100% reproducible and can also be adjusted by software comfortably. Inputs 3 and 4 are extremely flexible balanced universal inputs. Firstly, they operate exactly as inputs 5 to 8 on the rear and can be adjusted to accept standard studio input levels (+4 dBu, LoGain). Furthermore, the input impedance can be switched from Line (10 kOhm) to Instrument (470 kOhm). An additional analog input amplification of up to 18 dB (in steps of 0.5 dB) is also available. In short: There's no signal that these inputs can't deal with perfectly! Inputs 5 to 8 on the rear feature RME's proven level references. -10 dBV, +4 dBu und Lo Gain can be selected in the settings dialog, equivalent to +2 dBV, +13 dBu und +19 dBu for digital full scale. The same applies to the balanced rear analog outputs 1 to 6. The high power phones output offers high volumes even with low-impedance headphones, and represents playback channels 7/8. All outputs can be used for ASIO Direct Monitoring purposes. An ADAT optical I/O allows for a connection and insertion of effects devices, mixing consoles or external converters. Of course, these 8 channels are available simultaneously with the analog channels. Using an additional ADI-8 DS or OctaMic D, you'll get 16 analog inputs and outputs, which remain still 12 at 96 kHz. The coaxial SPDIF I/O , which is fully AES/EBU compatible (as is common for RME), also works up to 192 kHz, which means that at the highest sample rate, 8 analog and two digital inputs and outputs are directly available. SPDIF can also be accessed through the optical I/O, which also works up to 192k - a world exclusive RME feature.

All settings including TotalMix are recalled during boot, due to an internal flash memory. So the device can be configured and used as a stand-alone device, without being connected to a computer.

The Fireface 400 is equipped with SteadyClock, RME's unique sync and clock technology. With this, the device becomes a sync reference for the whole studio. SteadyClock refreshes clock signals, removes jitter, and takes permanent care of optimal conversion quality, thus guarantees a sensational sound quality, completely independent from the reference clock's quality.

SteadyClock allows the unit to control the sample rate freely on its own. The Settings dialog includes a direct choice of the video and audio world's most often used sample rates. Additionally, two faders can be used to set the sample rate freely and in real-time, within the range of +/- 4% and +/- 0.4%.

Fireface 400 uses RME's own FireWire techology, heavily optimized for audio purposes (RME is the only manufacturer not to use a third party FireWire audio technology). Minimum overhead, special hardware adaptations, and a new low-latency buffer concept allow a performance and compatibility considered impossible for FireWire audio until now. This includes changing latency in mid-operation, latencies down to one ms, or an immediate reaction to changes of the sample rate. Further optimizations and additional features can be added at any time by Flash Updates.

The Fireface 400 certainly provides a second FireWire port for hub functionality. Several devices can be connected to one FireWire interface and operated in parallel. The renowned Fireface 800 shares the same driver, allowing mixed setups.

• Two digitally controlled Mic Preamps in high-end quality
• Two balanced universal inputs for line and instrument signals
• SteadyClock for maximum jitter suppression and clock refresh
• Simple stand-alone operation with rotary encoder and front panel display
• 54 Level Meter Peak/RMS, hardware-calculated
• Full mobility by Bus Power support
• Full hot-plugging
• Up to 3 units operational
• DIGICheck, RME's unique meter and analysis tool

• Input AD: 6 x 1/4" TRS (4 x Line, 2 x Line/Instrument), 2 x XLR/TRS Combo connector (2 x Mic/Line) all servo-balanced.
• Output DA: 6 x 1/4" TRS, servo-balanced, DC-coupled signal path. 1 x 1/4" TRS unbalanced
• Input Digital: 1 x ADAT optical or SPDIF optical, SPDIF coaxial (AES/EBU compatible)
• Output Digital: 1 x ADAT optical or SPDIF optical, SPDIF coaxial (AES/EBU compatible)
• MIDI: 2 x MIDI I/O via breakoutcable (4 x 5-pin DIN jacks), for 32 channels low jitter hi-speed MIDI
• Dynamic range AD: 110 dB RMS unweighted, 113 dBA
• THD AD: < -110 dB (< 0.00032 %)
• THD+N AD: < -104 dB (< 0.00063 %)
• Crosstalk AD: > 110 dB
• Dynamic range DA: 110 dB RMS unweighted, 112 dBA (unmuted)
• THD DA: < -100 dB (< 0.001 %)
• THD+N DA: < -97 dB (< 0.0014 %)
• Crosstalk DA: > 100 dB
• Input/Output level for 0 dBFS @ Hi Gain: +19 dBu
• Input/Output level for 0 dBFS @ +4 dBu: +13 dBu
• Input/Output level for 0 dBFS @ -10 dBV: +2 dBV
• Sample rate internally: 32, 44.1, 48, 64, 88.2 kHz, 96 kHz, 128, 176.4, 192 kHz
• Sample rate externally: 28 kHz - 200 kHz
• Frequency response AD/DA, -0.5 dB: 5 Hz - 21 kHz (sf 44.1 kHz)
• Frequency response AD/DA, -0.5 dB: < 5 Hz - 43.3 kHz (sf 96 kHz)
• Frequency response AD/DA, -1 dB: < 5 Hz - 70 kHz (sf 192 kHz)

System Requirements

PC

• Windows 2000 SP4
• Windows XP/XP64
• Full ASIO multi-client operation of WDM, MME (not XP64), GSIF 2.0 and ASIO 2.0. WDM (DirectSound) with stereo and multi-channel support. Full hot-plugging. Up to 3 units operational.

Mac

• Mac OS X (10.3. or up) and x86
• Core Audio, Core MIDI. Since 10.4 (Tiger) up to 3 units operational

	M-Audio ProFire 2626 Firewire Audio Interface M-Audio ProFire 2626 is delivering 26 x 26 channels of simultaneous I/O. No matter what connections you need to make, the Pro Fire2626 has you covered,...	Sale Price: $529.00 Save: 41%
	Alesis FirePort 1394 Firewire Interface Alesis Fireport 1394 allows users of the popular HD24 Hard Disk Recorder to connect their ADAT/FST hard drives to a computer using a standard IEEE-1394...	Sale Price: $199.00 Save: 20%
	PreSonus Firestudio Project FireWire Interface FireStudio Project a complete 24-bit/96K professional recording system combining eight Class A XMAX microphone preamplifiers, 24-bit/96k sample rate...	Sale Price: $499.95 Save: 28%
	RME Fireface 800 Firewire Audio Interface RME Fireface 800 is a 56 channel 24 bit / 192 kHz high-end, high performance and high speed FireWire audio interface for use both the Mac and Windows. Fireface...	Sale Price: $1,699.00 Save: 15%
	RME HDSP 9632 Hammerfall DSP PCI Card RME Hammerfall DSP 96/32 is the world's most versatile PCI Audio Interface. RME HDSP 9632 is contains the latest AD- and DA-converters with more than 110 dB...	Sale Price: $499.00 Save: 50%
	Echo Audiofire 4 Firewire Interface Echo AudioFire 4 Firewire Audio Interface offers a compact audio interface with all the connections you need for your studio. With the flexibility of...	Sale Price: $299.00 Save: 14%
	PreSonus MSR Monitor Station Remote for PreSonus FireStudio PreSonus MSR Monitor Station Remote for the PreSonus Firestudio gives volume, dim, mute mono, and speaker switching as well as the ability to switch between...	Sale Price: $199.00 Save: 50%

• Number of Reviews:  ( 0 )
• Share your thoughts with other customers on RME Fireface 400 Firewire Audio Interface.
• Write Your Buying Experience