Shure P9TRA Wireless In-ear Monitoring System (L6 Band, 656 - 692MHz)

Shure P9TRA

The P9T has a compact half-rack design with XLR/TRS combo inputs, loop outputs, and a 3.5mm headphone jack for monitoring. The P9T also has a backlit LCD display and LED level meters.

The P9RA features an enhanced digital stereo encoder, so you'll hear with excellent audio quality and detail. It also features Automatic Gain control that greatly prevents dropout from RF overload - and lets you use more channels simultaneously, so you won't have to worry about losing your mix midshow. And this receiver certainly syncs to a P9T transmitter quickly and easily via Scan and Sync.

General

• Wireless in-ear monitoring system - Frequency Band: L6
• Scan and Sync technology saves time during setup
• CueMode lets the monitor engineer listen in on up to 20 mixes
• MixMode technology lets you create a custom mix of two separate channels
• Audio Reference Companding (ARC) for more natural wireless sound quality
• Active RF Gain Control to prevent RF distortion
• Separate level and clip indicators, so you can identify the problem
• Handy L/R outputs on the back panel can be used to daisy-chain units
• Optional Earphones available separately
• Includes P9T transmitter and P9RA rechargeable bodypack receiver

Transmitter

• Compact half-rack design for easy transportation and installation in any standard equipment rack
• Front-panel input gain control and LED level meters
• 3.5mm headphone jack for convenient monitoring
• Backlit LCD displays vital info
• XLR/TRS combo inputs accept a variety of audio sources
• Loop out connectors make it easy to create multiple mix setups
• Compatible with the PA421SWB and PA821SWB antenna combiners, and offers front or back mountable antennas

Receiver

• Ultra-thin, low profile bodypack allows discreet placement on the performer
• Rechargeable, so battery hassles are a thing of the past
• Enhanced digital stereo encoder provides excellent audio clarity and detail
• RF Scan - stand where the artist will be on stage and instantly check RF level
• Automatic Gain Control greatly prevents signal dropout due to RF overload
• Syncs to a P9T transmitter quickly and easily over IR link using Scan and Sync
• Switchable 10/50/100 mW output power provides a robust RF link in a variety of environments
• Separate, easily visible audio and RF status indicator LEDs
• Audio level and battery life metering
• Selectable high-frequency EQ boost (+3/+6dB at 10kHz)
• Volume and balance controls
• Extruded aluminum construction for rugged dependability

Transmitter

• Output Power: 10/50/100mW, Selectable (Regionally Dependent)
• Output Impedance: 50 Ohms (RF, Typical)
• Input Level: +4dBu and -10dBV, Switchable
• Connectors:
  2 x XLR/TRS Combo Inputs
  2 x 1/4" Loop Outputs
  1 x DC Power Input
  1 x Antenna Connector
  1 x 3.5mm Headphone Jack
• Power Requirements: 415mA, Typical (RF On, 100mW Power Mode, No Audio)
• Dimensions (WxDxH): 7.75 x 6.5 x 1.6" (197 x 166 x 42mm)
• Weight: 1.9 lbs (0.85kg)

Receiver

• Number of Frequencies: 20 per band
• Auto Frequency Scan: Yes
• Transmitter Inputs: No Transmitter
• Transmitter Outputs: No Transmitter
• Receiver Output Jack: 1 x 1/8"
• Receiver Power: Rechargeable
• Earphone Type: No Earphones
• Earphone Freq Response: No Earphones
• Earphone Cable Length: No Earphones
• Dimensions (WxHx): 3.3 x 0.9 x 2.6"
• Weight: 0.44 lbs

• Number of Reviews:  ( 0 )
• Share your thoughts with other customers on Shure P9TRA Wireless In-ear Monitoring System (L6 Band, 656 - 692MHz).
• Write Your Buying Experience