| Subtotal: $0.00 | Items In Cart: 0 | View Cart | Order Status | My Account |
Shure Beta 54 WBH54 Wireless Headworn Vocal Microphone
Shure Beta 54subminiature, electret condenser headworn microphone gives you uncompromised sound quality and reliability. In spite of its small size, the condenser element delivers full, clear, and natural reproduction of speech and vocals. With a frequency response of 50Hz-20kHz, the Beta 54 captures vocal nuances that many other headworn mics just can't reproduce.You can mount the Beta 54 on a lightweight, low-profile wire frame headband with over-the-ear arms, either on the left side or right side, whichever is most comfortable. It's fully adjustable for stability and comfort. The Beta 54 is compact and unobtrusive, so whether you're in broadcast, theater, and touring, your audience will see you, not the mic! For demanding stage uses such as singing dancers, drummers and guitar players, the Beta 54 WBH54 will be your "go-to" microphone. It can handle extremely high sound pressure levels, so the loudest vocalist won't faze it. Plus, the supercardioid polar pattern of the Beta 54 rejects off-axis noise, so you'll encounter fewer problems with bleed. The WBH54 is terminated with a Shure TA4F connector to fit Shure and many other wireless transmitter packs. Features Subminiature electret condenser microphone for vocal applications Supercardioid polar pattern provides maximum gain-before-feedback and ambient rejection Extended 50Hz-20kHz frequency response tailored for vocal performances Able to handle extremely high sound pressure levels Snap-fit foam windscreens stay in place during intensive movement TA4F connector for wireless applications 5-foot cable with connector Specification Type: Condenser (electret bias) Frequency Response: 50Hz to 20KHz Polar Pattern: Supercardioid Output Noise (equivalent dBSPL, A-weighted): 39.0 dB typical; 42.0 dB maximum Signal-to-Noise Ratio: 55.0 dB at 94 dB SPL Recommended Minimum Input Impedance: >1 kilohm Preamp Output Impedance: 136 ohms Output Level, open circuit, ref. 1v/Pa at 1 kHz: -52.0 +/- 3.0dB 2.51mV Maximum Sound Pressure Level: 149 dBSPL at 1% THD/1 kilohm load Dynamic Range: 110 dB (max. SPL with 1k load, minus typical A-wt. noise) Current Drain: 4.6 mA (preamp and microphone) Output Polarity: Power Requirements: Phantom power; 11 to 52 Vdc positive on pins 2 and 3, return on pin 1 (ground) Net Weight: 135.35 g (4.75 oz.) microphone and in-line preamp Cable: 1.5 m (5 ft.), small-diameter, shielded, with mini 4-pin connector (TA4F) |














