Sonnox Post Plug-in Bundle

Sonnox Post

 plug-in bundle includes Sonnox Restore suite, which features the DeClicker, DeBuzzer and DeNoiser audio restoration plug-ins, together with the classic Oxford EQ and Dynamics algorithms from the OXF-R3 digital console. The versatile Oxford Reverb, Limiter and SuprEsser dynamic EQ are also included, making Sonnox Post the ultimate post-production super bundle.

Sonnox Oxford DeClicker plug-in removes short duration noise events from audio material using advanced algorithms that results in a high quality of repair. The DeClicker features three main sections such as DePop, DeClick and DeCrackle, with each sections dealing with events that are up to 10mS, 3mS and 0.4mS in duration respectively.

Sonnox Oxford DeBuzzer plug-in removes hum and buzz from audio material and is divided two stages including detection and removal. The DeBuzzer features several ways of helping isolate the fundamental frequency, including the Peak Profile, the large FFT display, etc.

Sonnox Oxford DeNoiser plug-in removes wide-band noise from audio material using techniques based around the concept of a "noise profile". The noise profile is used to gate-out components of the frequency spectrum that are below it, while keeping the components that are above it.

DeClicker

• Three sections with individual thresholds and controls: DePop, DeClick and DeCrackle
• Event display gives intuitive visual feedback of energy and duration of detected events
• "Exclude Box" to select events that should not be repaired
• Dialogue Mode that allows two separate sets of control settings distinguished by input level
• Excitation displays to aid accurate setting of threshold controls
• Three audition modes, including option to listen to only removed events
• Advanced algorithms for accurate detection and high quality repair

DeBuzzer

• High performance hum and buzz removal using advanced algorithms
• Separate Detect and Remove Sections for intuitive workflow
• Scalable high resolution FFT of input signal shows strongest harmonics and removal filter
• Very accurate setting of fundamental over 3 frequency ranges
• Integrating frequency display shows strength of fundamental
• Tracking mode can be set to Automatic or Fast to follow fundamentals that wander in frequency, or to Freeze for fundamentals that vary in amplitude
• Choice of removal filters: Comb for general purpose narrow removal over many harmonics, or Parametric EQ for a more musical removal over a small set of harmonics
• Two audition modes, including option to listen to the removed buzz

DeNoiser

• High performance noise removal using advanced algorithms
• Separate DeHisser, Detect and Remove Sections for intuitive workflow
• High resolution FFT of input signal showing noise profile
• Efficient DeHisser for preparation before wide-band noise reduction
• Detector noise profile can be set to automatic, freeze or manual
• Noise threshold and reduction are controllable in frequency bands using adjustable bias curve
• Two audition modes, including the option to listen to the removed noise
• Warmth control for sweetening after noise removal
• Make-up gain for true A/B comparisons

EQ

• 5-band fully parametric EQ
• Variable High-Frequency and Low-Frequency up to 36dB/Octave
• Algorithm taken directly from the Sony OXF-R3 console
• Four different EQ types in one plug-in
• Fully de-cramped HF response
• A/B switches (automatable)
• Ultra low noise and distortion

Dynamics

• The dynamics section from the Sony OXF-R3 console
• Separate sections for Compressor, Gate, Expander, Limiter
• 2-band side chain EQ (with audition function)
• Warmth control for extra presence and tube-like warmth
• Three different compressor types (linear and exponential curves)
• Variable soft knee compressor
• Separate 5.1 bus compressor (where supported)
• Ultra low noise and distortion

Reverb

• Extremely flexible stereo modeling reverb
• Real-time continuous control over all parameters
• Independent control of early reflections and reverb tail
• Dual independent paths for both early reflections and reverb tail function
• Each reverb path type can be used independently or in combination
• Integrated 5-band EQ based on the Oxford EQ with high and low pass filters
• More than 120 snapshots for immediate use under the headings of Dry Spaces, Ambient Effects, Vocal Reverbs, Plates, Rooms, Chambers, Halls, Churches and Foley Effects

Limiter

• Limiter plug-in comprising four cascaded processes
• Enhance section to increase perceived loudness
• Reconstruction meter shows 'actual' signal rather than sampled signal
• Auto compensate feature corrects reconstruction errors without losing overall program loudness
• Attack, release and variable soft knee controls
• Comprehensive dither and noise shaping
• Includes many factory presets

SupeEsser

• Highly featured professional De-Esser
• Linear Phase Dynamic EQ
• Transparently controls aggressive frequencies
• Automatic Level Tracking follows energy levels (no need to automate threshold)
• Large intuitive graphic display makes finding frequencies very easy
• Full Spectrum Operation (20Hz -20KHz)
• Three different 'Listen' modes
• Very easy to use
• Advanced Mode for ultimate control of the Dynamic EQ
• Many creative as well as corrective uses
• Presets provide good starting points

	Sonnox Oxford TransMod Plug-in (Native) Sonnox Oxford Transient Modulator is a plug-in, allowing dynamic level of signals to be modified by the transients in the program material over time, and the...	Sale Price: $180.00 Save: 38%
	Sonnox Oxford Inflator Plug-in (Native) Sonnox Oxford Inflator plug-in provides an increase in the apparent loudness of almost any program material without obvious loss of quality or audible...	Sale Price: $180.00 Save: 38%
	Sonnox Oxford Inflator Plug-in for Pro Tools HD Sonnox Oxford Inflator plug-in provides an increase in the apparent loudness of almost any program material without obvious loss of quality or audible...	Sale Price: $310.00 Save: 6%
	Sonnox Oxford EQ Plug-In w/ GML Option for Pro Tools TDM Sonnox Oxford EQ plug-in is based on the OXF-R3 EQ section. It's a fully functional 5-band application with selectable shelf settings on low- and...	Sale Price: $800.00 Save: 30%
	Sonnox Enhance Plug-in Oxford Processing Bundle TDM Sonnox Enhance bundle includes the Oxford Inflator, Oxford Transient Modulator and the Oxford Limiter plug-ins. Each of three plug-ins can add loudness,...	Sale Price: $999.00 Save: 8%
	Sonnox Oxford DeNoiser Restoration Processing Plug-in Sonnox Oxford DeNoiser plug-in removes wide-band noise from audio material using techniques based around the concept of a "noise profile". The noise...	Sale Price: $842.00 Save: 5%
	Sonnox Oxford DeBuzzer Restoration Processing Plug-in Sonnox Oxford DeBuzzer plug-in removes hum and buzz from audio material and is divided two stages including detection and removal. The DeBuzzer features...	Sale Price: $842.00 Save: 5%

• Number of Reviews:  ( 0 )
• Share your thoughts with other customers on Sonnox Post Plug-in Bundle.
• Write Your Buying Experience