Sony DSR-1800A DVCAM Player

DVCAM Master Series Digital Videocassette Recorder w/i.LINK interface. The DSR-1800A has i.LINK interface as standard signal input/ouput. i.LINK interface includes audio unlock/lock function--when an unlocked audio signal in a DV recording (10 micron) is input via the i.LINK connector, or played back in a DV recording, this new A version Master Series VTR will automatically transform it to a locked audio signal which is defined as the standard of the DVCAM format to ensure frame-accurate editing. Two major features of the DSR-1800A is the built-in jog/search dial and its multiple format playback capability of DV (SP only) and DVCPRO 25. This unit has the ability to automatically accommodate all 25 Mbps cassette sizes, and does not require a cassette adapter or menu setting changes for playback of these formats.

The DSR-1800A also has a full range of both analog and digital interfaces. The availability of the SDI interface ensures a migration path to Digital Betacam, Betacam SX and SDI-based systems. The SDTI (QSDI) interface enable a quality deterioration-free transfer between the DSR-1800A and DV compression-based systems.

Playback Compatibility with DV (25 Mbps) Formats
The DSR-1800A offers excellent playback compatibility with DV family formats (25Mbps). The DV family formats include DVCAM, DV (SP mode only) and DVCPro 25. These tapes can be played back and utilized directly as editing materials with +/-0 Frame accuracy.

Triple-positioning Cassette Compartment
Triple-positioning cassette compartment automatically accepts DVCPRO medium-size cassette tapes in addition to standard and mini size cassette tapes of DV, DVCAM and DVCPRO. Cassette insertion is done without the need for an external adapter, or the need to set the playback format mode before use.

Digital Slow Motion and Jog Sound
The DSR-1800A offers a variable speed playback function with a range of -0.5 to +0.5 times normal speed. Play back of digital noiseless slow motion pictures and jog sound is also possible within this range. This enables the fast and accurate locating of edit points on the tape. This feature is available for all DV (25Mbps) format recorded tapes.

Dynamic Motion Control
By utilizing a DMC-capable editing controller, the DSR-1800A can vary the playback speed for a certain section of a tape in the range of -0.5 to +0.5 times normal speed. Segments can be stored in memory for playback at the same speed. (NOTE: DMC is not available through i.LINK and SDTI(QSDI) due to minute speed video data processing capability.)

Clip Link Operation
By integrating the DSR-1800A into a non-linear editing (NLE) system which supports ClipLink operation, the VTR is able to send ClipLink information data onto the NLE unit, providing great efficiency throughout the editing process.

Frame Accurate Editing
The DSR-1800A is equipped with an RS-422A remote control connection to interface with the other compatible equipment. The deck offers a variable speed playback function with a range of -0.5 to +0.5 times normal speed. Play back of digital noiseless slow motion pictures and jog sound is also possible within this range. This enables the fast and accurate locating of edit points on the tape. This feature is available for all DV (25Mbps) format recorded tapes.

Audio cross-fade function is available for noiseless audio transitions at editing points. Audio mix/swap and voice-over functions are possible without any delay between the video and studio signals. In addition, all four audio channels can be edited independently, which is applicable in creating or editing video material in multiple languages, or implementing multiple audio sources.

Clip Link Operation
By integrating the DSR-1800A into a non-linear editing system which supports ClipLink operation, the VTR is able to send ClipLink information data onto the NLE unit, providing great efficiency throughout the editing process.

Process Control/Video Control
The DSR-1800A is equipped with Process Control for both analog and digital outputs in order to obtain highly stable video signals. With Process Control, the video level, chroma level, Hue, Y/C Delay Sync phase, Sub-Carrier Phase and Set up (black) for Composite, S-Video, Component and SDI outputs can be controlled through the VTR menu. These features can also be adjusted from an external TBC remote controller through Video Control port (D-sub 15-pin) on the rear panel.

VITC Time Code
The DSR-1800A supports time code in the sub code area on a tape, and also VITC through all video signal interfaces. This time code is recorded on the video tracks. VITC output is achieved by inserting the signal into the vertical-blanking interval. The time code in sub code area can also be output as VITC.

Built-in Signal Generator
The DSR-1800A is equipped with a built-in signal generator which can generate color bars or black burst for video, and 1 kHz tone or mute signal for audio. This is very convenient for creating pre-striped tapes before editing.

Universal Powering System
The DSR-1800A is equipped with a universal powering system that can accommodate AC 100 Volts to 240 Volts, 50 or 60 Hz. A built-in regulator switches the unit to the appropriate voltage automatically. This allows the DSR-1800A to be used worldwide without the need for a transformer.

Auto Repeat Function
Auto repeat function is available through the VTR menu. Time code can also be set as start and stop points.

Signal System: NTSC System

Tape Format
DVCAM Play and Record
Consumer DV Play Only
DVCPro Play Only

Tape Speed: 28.193 mm/second

Signal-to-Noise Ratio: Greater than 55dB

Maximum Recording Time: 184 Minutes

Audio Signal Format: 16 Bit / 48kHz

Frequency Response
20 Hz to 20,000 Hz in 2CHannel Mode
20 Hz to 14,500 Hz in 4 Channel Mode

Signal to Noise Ratio: Not Specified by Manufacturer

Input and Output Connectors
Firewire- 6-Pin (x 1 input and output both)
Analog Component Video- 3-BNC (x 1 input, 1 output)
S-Video- 4-Pin (x 1 input, 1 output)
Composite Video- BNC (x 2 input, 2 output)
Reference Video- BNC (x 2 input, 1 output)
Time Code- BNC (x 1 input, 1 output)
Audio- XLR (x 4 input, 4 output)
Control S- Mini Stereo (x 1)
RS-422A- 9-Pin (x 1)
Video Control- 15-Pin (x 1)
Audio Monitor- 1/4-Inch Phono (x 1 output)
Headphone- 1/4-Inch Phono (x 1)
SDI Video- Optional with DSBK-1801 provides BNC (x 2 input, 2 output)
SDTI Video- Optional with DSBK-1802 provides BNC (x 1 input, 1 output)

Power Requirements: 100 Volts to 240 Volts AC, 50/60 Hz

Power Consumption: 100 Watts

Operating Temperature
41° to 104° F
5° to 40° C

Dimensions (WxHxD)
16.9 x 6.9 x 15.75 Inches
427 x 174 x 400 mm

• Number of Reviews:  ( 0 )
• Share your thoughts with other customers on Sony DSR-1800A DVCAM Player.
• Write Your Buying Experience