dbx 1231 Dual Channel 31-Band Equalizer Open Box

dbx 1231 Dual Channel 31-Band Equalizer Open Box

$316.54
Out of stock
Qty:
SKU: DBX1231NSAU1 Category:

A new, unused item with absolutely no signs of wear. Open box, but inside packaging with original protective wrapping. Not factory second. Full manufacturer’s warranty and free one year extended warranty from Gigasonic.

dbx 1231 is a dual channel, 31 band 1/3 octave graphic equalizer providing such standard features as dual channels of 31 – 1/3-octave bands, ISO frequency centers, +/-12dB of input gain range, and switchable 40Hz/18dB per octave low-cut filters. Other features on the 1231 Equalizer include 45mm faders, selectable +/-6dB or +/-15dB boost/cut range, XLR, barrier strip, and 1/4″ TRS connectors, balanced inputs and outputs, and chassis/signal ground lift for quick hum isolation.

Features

Switchable boost/cut ranges of ±6 or ±15 dB

Electronically balanced/unbalanced inputs

Servo balanced/unbalanced outputs

RF filtered inputs and outputs

XLR, Barrier Strip, and 1/4″ TRS connectors

-12dB/+12dB input gain range

18dB/octave 40Hz Bessel low-cut filter

Chassis/signal ground lift capability

Internal power supply transformer

Power-off hardwire relay bypass with 2-second power-up delay

Specifications

Input Connectors: 1/4″ TRS, female XLR (pin 2 hot), and barrier terminal strip

Input Type: Electronically balanced/unbalanced, RF filtered

Input Impedance: Balanced 40 kOhm, unbalanced 20 kOhm

Max Input: >+21dBu balanced or unbalanced

CMRR: >40dB, typically >55dB at 1kHz

Output Connectors: 1/4″ TRS, male XLR (pin 2 hot), and barrier terminal strip

Output Type: Impedance-balanced/unbalanced, RF filtered

Output Impedance: Balanced 200 ohm, unbalanced 100 ohm

Max Output: >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)

Bandwidth: 20Hz to 20kHz, +0.5/-1dB

Frequency Response: 50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range

Dynamic Range: 109dB; 115dB

Signal to Noise Ratio: 90dB, 97dB

THD+Noise: <0.005%

Interchannel Crosstalk: <-80db, 20Hz to 20kHz

Bypass Switch: Bypasses the graphic equalizer section in the signal path

Low cut Switch: (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter

Range Switch: (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range

I/O Meter :4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu

Indicators: EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)

Operating Voltage: 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz

Power Consumption: 24W

Power Connector: IEC receptacle

Dimensions (WxHxD): 19 x 5.25 x 7.9″ (48.3 x 13.4 x 20.1cm)

Unit Weight: 10.6 lbs.

Related products