Behringer NX1000 Ultra Lightweight Class D 1000W Power Amplifier Used

Behringer NX1000 Ultra Lightweight Class D 1000W Power Amplifier Used


Out of stock

SKU: BEHNX1000USED Category:
snap finance


An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. Full manufacturer’s warranty and free one year extended warranty from Gigasonic.

Behringer NX1000 is lightweight (at 7.3 lb) and compact, and is capable of delivering 160W of peak power per channel into a pair of 8-Ohm speakers, and in bridge mode, up to 1000W of peak power into a 4-Ohm speaker. The NX1000 is so much more efficient than conventional designs, it runs cooler and doesn’t require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to the company’s “Zero-Attack” limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX1000 full-out for hours on-end. The company’s revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.


Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode) and weighs less than 7.3 lbs / 3.3 kg

Ultimate reliability through revolutionary cool-running High-Density Class-D technology with “near-zero” thermal buildup

Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption

Built-in stereo crossover with low-cut, high-cut and full range mode

SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance

“Zero-Attack” limiters offer maximum output level with reliable overload protection

Detented and illuminated gain controls for precise level setting

Precise 4-segment Signal and Limit LEDs to monitor performance

XLR and 1/4″ TRS combination input connectors for compatibility with any source

Professional twist-lock speaker connectors for ultimate reliability

Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show

“Back-to-front” ventilation system prevents thermal buildup for reliable operation

Designed and engineered in Germany


Maximum Output Power:
2 x 500 W into 2 Ohms
2 x 300 W into 4 Ohms
2 x 160 W into 8 Ohms
1000 W into 4 Ohms (bridge mode)
620 W into 8 Ohms (bridge mode)

Type: High-density Class-D technology

Modes of Operation: Stereo, dual-mono, and mono bridge modes (switchable)

Crossover Adjustment: Full range, low-cut, and high-cut modes

Input Sensitivity: 0.775 V (0 dBu), for rated power into 4 Ohms

Distortion: <0.05%

Frequency Response: 20 Hz to 20 kHz, +0 / -1 dB

Damping Factor: >155 at 8 Ohms

Input Connections:
2x XLR-1/4″ / 6.3 mm combo connectors (L/R)
Accepts balanced and unbalanced sources

Signal to Noise: >100 dB

Output Connectors: 2 x twist-lock speaker sockets (L/R)

Controls Front Panel:

Channel A gain knob
Channel B gain knob

Power switch

Power: Amber LED
Limit: 0 dB LED (per channel)
Signal: -40, -6, -3 dB LEDs (per channel)
Protect: Red LED (per channel)

Cooling: Back-to-front air flow

Amplifier Protection:
Thermal and DC protection
Stable into reactive or mismatched loads

Overload Protection: On/off muting, DC-fault power supply shutdown

Power Supply: 100-120 VAC, 50/60 Hz

Fuse: T 6.3 A H, 250 V

Power Consumption: 150 W, at 2 Ohms, 1/8 rated power

Power Connector: Standard IEC receptacle

Dimensions: 3.7 x 19.0 x 9.1″ / 94 x 483 x 231 mm (including 0.19″ / 5 mm rubber feet)

Weight: 7.3 lb / 3.3 kg

Additional information

Weight 10 lbs