Earthworks DK7 is a high-performance full kit system. You can get four DM20 cardioid condenser microphones, two SR25 cardioid condenser microphones and one SR20LS cardioid condenser microphone.
Earthworks DM20 cardioid condenser microphone is designed for recording or amplifying live drums–specifically your snare or tom-toms. The microphone features a frequency response of 50 Hz to 20 kHz in order to capture the full tonal palette of the drum.
Earthworks SR25 cardioid condenser studio microphone is designed for precision pickup in crucial recording and sound reinforcement environments. Its cardioid pickup pattern provides exceptional rejection of off-axis signal and noise due to room ambiance, instruments, monitor speakers, etc.
Item Includes
- 4 x Earthworks DM20 Cardioid Condenser Microphone
- 3 x Earthworks SRW3 Foam Windscreen
- 2 x SR25 Microphones
- SR20LS Low Sensitivity Microphone
- 3 x Microphone Clips
- Carrying Case
Earthworks DK7 Features
4 DM20 small-diaphragm cardioid condenser mics (for toms and snare)
2 SR25 small-diaphragm cardioid condenser mics (for overheads
1 SR20LS small-diaphragm cardioid condenser mic (for bass drum)
4 RM1 RimMount for DM20
4 PW1 foam windscreens for DM20
3 MC1 microphone clips for SR25/SR20LS
3 SRW3 foam windscreens for SR25/SR20LS
Earthworks DK7 Specs
DM20
- Frequency Response: 20Hz – 20kHz
- Polar Pattern: Cardioid
- Sensitivity: 8mV/Pa (-42dBV/Pa)
- Power Requirements: 24-48V Phantom, 10mA
- Max Acoustic Input: 150dB SPL
- Signal-to-Noise Ratio: 74dB A-weighted
- Output: XLR (pin 2+)
- Output Impedance: 200Ω balanced (between pins 2 & 3)
- Min Output Load: 1000Ω between pins 2 & 3
- Noise: 20dB SPL equivalent (A weighted)
- Dimensions (L x D): 282mm x 22mm (11.12 x .860 inches)
- Gooseneck Length: 121mm (4.75 inches)
- Weight: .55 lb. (.25kg)
SR25
- Frequency Response: 20Hz – 25kHz
- Polar Pattern: Cardioid
- Sensitivity: 10mV/Pa (-40dBV/Pa)
- Power Requirements: 24-48V Phantom, 10mA
- Max Acoustic Input: 145dB SPL
- Output: XLR (pin 2+)
- Output Impedance: 65Ω balanced (between pins 2 & 3)
- Min Output Load: 600Ω between pins 2 & 3
- Noise: 20dB SPL equivalent (A weighted)
- Dimensions (L x D): 165mm x 22mm (6.5 x .860 inches)
- Weight: .35 lb. (160g)
SR20LS
- Frequency Response: 20Hz – 20kHz
- Polar Pattern: Cardioid
- Sensitivity: 3mV/Pa (-50dBV/Pa)
- Power Requirements: 24-48V Phantom, 10mA
- Max Acoustic Input: 150dB SPL
- Signal-to-Noise Ratio: 74dB A-weighted
- Output: XLR (pin 2+)
- Output Impedance: 200Ω balanced (between pins 2 & 3)
- Min Output Load: 1000Ω between pins 2 & 3
- Noise: 20dB SPL equivalent (A weighted)
- Dimensions (L x D): 192mm x 22mm (7.57 x .860 inches)
- Weight: .36 lb. (164g)
