JBL VRX915M 15 in. Two-Way Stage Monitor

JBL VRX915M 15 in. Two-Way Stage Monitor


Out of stock

SKU: JBLVRX915M Category:
snap finance


JBL VRX815M can be bi-amped or used as a full-range passive monitor with a nominal coverage of 50 x 90°. The VRX915M uses the JBL Differential Drive 15″ woofer containing a neodymium magnet saving on weight but not on power. Crystal clear highs are provided by the 4″ compression driver also using a neodymium magnet.


Compact and low-profile for minimal obstruction of audience sightlines

50° x 90° nominal coverage

Bi-amplified or full-range passive operation

Differential Drive woofer with neodymium magnet for high power capacity and very light weight

4″ (voice coil) diameter compression driver with neodymium magnet


Power Rating: 800 W / 1600 W / 3200W

Frequency Range: 60 Hz – 20 kHz

Dimensions(H x W x D): 629 mm x 432 mm x 324 mm (375 mm stage height); 24.75 in x 17 in x 12.75 in (14.75″ stage height)

Frequency Response: 70 Hz – 20 kHz

Coverage Pattern:50° x 90° nominal

Crossover Modes: Passive / Bi-amp

Crossover Frequency: 1.1 kHz

System Maximum SPL: 127 dB SPL continuous (133 dB SPL peak)

System Sensitivity (1w @ 1m): 98 dB SPL

LF Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive® woofer 8 Ohms

HF Driver: 1 x JBL 2453H-SL, 38 mm (1.5 in) exit compression driver, 100 mm (4 in) voice coil and neodymium magnet

Nominal Impedance: 8 ohms

Active Tunings: Tunings available at www.jblpro.com

Enclosure: Symmetrical stage monitor, 15/18 mm, plywood

Finish: Black DuraFlex finish

Grille: Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing

Input Connectors: Neutrik Speakon NL-4 (x2), one on each end

Net Weight: 21 kg (46.0 lb)

Additional information

Weight 65 lbs