Manley Core Reference Channel Strip

Manley Core Reference Channel Strip

$2,249.00
Out of stock
Qty:

Manley Core is a combination mic preamplifier, compressor, equalizer, and limiter.
Front panel controls include a 48-volt phantom power switch,120Hz highpass filter switch, phase invert switch, input attenuator (variable pad), mic pre selectable gain (40 dB or 60 dB; total gain >70 dB), and line amp selectable gain (20 dB or 40 dB). The mic/line preamp includes hand-wound Manley IRON input transformer with nickel laminations in a mu-metal can, Class-A tube amplifying stage, circuit topology (similar to the Manley VOXBOX and Manley Dual Mono and Mono Microphone Preamplifiers), all-triode high voltage vacuum tube circuit, and regulated 300 Volt B+ supply.

The compressor section, with a 3:1 ratio and placed before the mic preamp, features Manley’s ELOP technology (also found in the Manley VOXBOX), continuously variable Attack, Release, and Threshold controls, and a Silent Bypass switch. The equalizer offers low and high Baxandall shelves (80 Hz and 12 kHz) with ± 12dB range and Sweepable Midrange Bell EQ (100 Hz to 1 kHz) or (1 to 10 kHz) with ±10dB range. The limiter features a fast-attack FET brickwall limiter, continuously variable Threshold and Release controls, Peak Limit LED indicator and 10dB range output gain control.

Features

Front Panel Controls
48V Phantom power switch
120Hz High Pass Filter switch
Phase Invert switch
Input Attenuator (Variable Pad)
Mic Pre Selectable Gain 40 dB or 60 dB (Total Gain >70 dB)
Line Amp Selectable Gain 20 dB or 40 dB

Mic/ Line Preamplifier
Hand-wound Manley IRON® input transformer with nickel laminations in a mu-metal can
Class A tube amplifying stage circuit topology (similar to the Manley VOXBOX® and Manley Dual Mono & Mono Microphone Preamplifiers)
All-triode high voltage vacuum tube circuit
Regulated 300 Volt B+ supply

1/4” Direct Input
Similar to the DI in the Manley SLAM!®
All-discrete solid-state circuit
10 Meg Ohm input impedance (ideal for guitars, bass, keyboards, etc.)

Compressor
ELOP® technology also found in the Manley VOXBOX
Compressor placed before the mic preamp—virtually impossible to clip
Ratio 3:1
Continuously variable Attack, Release, and Threshold controls
Silent Bypass switch

Equalizer
Low and High Baxandall shelves (80 Hz and 12 kHz) with ± 12dB range
Sweepable Midrange Bell EQ (100 Hz – 1 kHz) or (1–10 kHz) with ±10dB range

Limiter
Fast attack FET brickwall limiter
Continuously variable Threshold and Release controls
Peak Limit LED indicator
10dB range output gain control

Meter
Large illuminated analog display
3-way meter select to read Compressor gain reduction, Mic Preamp Output level, and Main Output audio levels.

Inputs And Outputs
Balanced XLR mic input
Balanced XLR line input
Front panel direct instrument 1/4” input
Insert point between Mic Preamp/Compressor and EQ/Limiter via 1/4” TRS jack
Balanced XLR direct output (after Preamp/Compressor section)
Balanced XLR main output

 

<iframe width=”560″ height=”315″ src=”https://www.youtube.com/embed/UhjWwr0ZJAA” frameborder=”0″ allow=”accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture” allowfullscreen></iframe>

Related products