AKG C 414 XL II/ST stereo condenser microphone matched pair bundle contains two C 414 XL IIs that have been selected from thousands of individual microphones and hand tested to for sensitivity characteristics that lie within 1dB of one another throughout the range of 300Hz to 8kHz in cardioid mode. They come with a full accessory kit that includes a pair of shock mounts, a stereo bar, two foam windscreens, and hardshell carrying case. You also get a copy of your microphones’ performance charts to verify their matched performance characteristics.
AKG C414 XLII offers nine pickup patterns which enable you to choose the perfect setting for every application. In addition to the five patterns traditionally offered by the C 414 (omnidirectional, wide cardioid, cardioid, hypercardioid, and figure eight), you also get four intermediate settings that let you dial in the best pattern to suite your environment. It also features an astoundingly low noise floor and a 152dB dynamic range, making the C 414 XL II ideal for any musical environment. A locking mode allows you to disable all of the C 414 XL II’s controls for live-sound applications and permanent installations, and a special “Peak Hold” LED displays even shortest overload peaks.
Omni, wide cardioid, cardioid, hypercardioid, figure eight, and four intermediate pickup patterns
Lock Mode disables all controls easily for live and installation use
Incredible Dynamic Range of 152 dB
Three different bass cut filters and three pre-attenuation levels
Peak Hold LED even detects shortest overload peaks
Paired using AKG’s sophisticated computer-aided matching method
Highest possible correlation over the whole frequency range and virtually identical sensitivity
Includes carrying case, two windscreens, a stereo bar, and two spider-type shock mounts
Frequency range: 20 to 20,000 Hz
Sensitivity: 20 mV/Pa (-34 dBV) ± 0.5 dB
Max. SPL: 200/400/800/1600 Pa = 140/146/152/158 dB (0/-6/-12/-18 dB) for 0.5% THD
Equivalent noise level: 6 dB-A (0 dB preattenuation) (IEC 60268-4)
Signal/noise ratio: 88 dB
Preattenuation pad: 0 dB, -6 dB, -12 dB, -18 dB, switchable
Bass cut filter slope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Impedance: <=200 ohms
Recommended load impedance: >= 2,200 ohms
Supply voltage: 48 V phantom power to DIN/IEC
Powering: approximately 4 mA
Connector: 3-pin XLR to IEC
Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
Net weight: 300g (10.6oz.)
