Audix Micro-D Mini Clip-on Condenser Drum Microphone

Audix Micro-D Mini Clip-on Condenser Drum Microphone



micr system with a modular capsule design
Out of stock
SKU: MicroD Category:

Audix Micro-D can be used with 3 types of specialized clips and 2 interchangeable capsules (hypercardioid capsule standard; optional cardioid). With a very smooth response curve from 40Hz-20kHz, the Audix Micro-D is lightweight and compact. Aluminum ring housing with rubber shockmount system. Operates on phantom power of 9-52V. The clip-on mic comes with phantom power adapter, integral D-Vice clamp, cable, windscreen, and carrying pouch. Low-noise circuitry and balanced low-impedance out provide quiet performance, even with long cables.

Audix Micro-D operates on phantom power of 9-52 Volts and is supplied with a phantom power adapter, integral Dvice clamp, cable, windscreen, and carrying pouch. Low noise electronic circuitry and balanced low impedance output allow for interference free performance even with long cable runs.

With a smooth uniform response over a frequency range of 40 Hz -20 kHz, the MICRO-D is lightweight, compact, and extremely easy to use. Housed in an aluminum ring and isolated by means of a rubber shock mount system, the Micro-D has a hypercardioid pick-up pattern and is capable of handling sound pressure levels up to 140 dB.


Lightweight, compact, low profile

Simple to set-up and use

Can be used to mic multiple drums at one time

Fits into tight spaces (between drums, beneath cymbals)


Transducer Type: Condenser (pre-polarized)
Frequency Response: 40 Hz – 20 kHz
Polar Pattern: Hypercardioid
Output Impedance: 250 Ohms
Open Circuit Sensitivity: 5 mV (ref 1k @ 1 Pascal)
Equivalent Noise Level: 24 dB (A weighted)
Signal to Noise Rati 70 dB (ref 1k @ 1 Pascal)
Power Requirements: 9 – 52v phantom
Maximum SPL: 140 dB
Cable/Connector: 3 pin goldplated male XLR
Polarity: Positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing: Capsule housing is brass; Protective ring is aluminum
Dimensions: 1.14 x .47″ (29 x 12mm) (Length x Diameter)
Weight: 2 oz / 57 grams
Finish: Black E-coat

Related products