Audix TM1 Plus Microphone Kit

Audix TM1 Plus Microphone Kit

Out of stock

Audix TM1 Plus includes the TM1 measurement microphone, threaded acoustic windscreen, shock mount clip, calibrator adaptor and microphone calibration data on CD. The data files are a numeric representation of the TM1 frequency response. Together with the provided sensitivity of the microphone, these can be used with a variety of popular software measurement systems to correct the response curve of the microphone.

Audix TM1 is a 6mm pre-polarized condenser microphone, using both for test and measurement applications. The TM1 is famous for its linearity, accurate response, consistency, ease of use and affordability. It also captures acoustic measurements for room analysis software programs, realtime analyzers and other sound control devices, featured a uniformly controlled omnidirectional polar pattern. The TM1 mic is an excellent condenser mic for sound engineers, sound companies and recording enthusiasts thanks to an extremely flat frequency range of 20Hz – 25kHz.


Precision 6mm pre-polarized condenser microphone

Captures acoustic measurements for room analysis software programs

Excellent tool for sound engineers, sound companies and recording enthusiasts

Uniformly controlled omnidirectional polar pattern

Precision-machined 4-stage brass body and capsule housing

Low noise SMT circuit, nickel plate finish, field replaceable parts

Switchraft XLR connector; shock-absorbent O rings

Designed, machined, assembled and tested by Audix in Wilsonville, OR, USA

Includes calibration data file, threaded acoustic windscreen, shockmount clip, and calibration adapter


Transducer: Pre-polarized condenser

Frequency Response: 20Hz to 25kHz +/-2dB

Polar Pattern: Omnidirectional

Output Impedance: 200 Ohms

Sensitivity: 6.5mV / Pa @ 1k

Max Input Sound Level (SPL): 130dB with distortion < 1% ; 140dB Max

Signal-to-Noise Ratio: 66dB

EIN: 28dB (A weighted)

Dynamic Range: 112dB

Connector: Switchcraft male XLR

Power: 18-52 volts phantom

Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector

Housing: 4 piece precision machined brass

Finish: Nickel

Length: 5.9″ (150mm)

Related products