Crown XLi 1500 power amplifie is powerful, rugged and reliable, and it is suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.
Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable. They feature extra-thick 8mm wire, performance quality connectors, and tension-resistant stress relief.
High performance speaker cable
8mm high quality rubber outer covering
14 gauge wire
Heat shrink protected connectors
Stereo/parallel/bridge-mono mode
User selectable input sensitivity – 0.775V and 1.4V
Efficient forced-air cooling prevents excessive thermal buildup
Electronically balanced RCA & XLR inputs; binding post and Speakon ® outputs
Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
Protection against shorts, no-load, on/off thumps and radio-frequency interference
Frequency Response: 20 Hz – 20 kHz, +0/-1 dB (at 1 watt)
THD: <0.5%, 20 Hz – 20 kHz
Intermodulation Distortion: =/ <0.35% (60 Hz and 7 kHz at 4:1 from full rated ouput to -30 dB)
Slew Rate: >10V/us
Voltage Gain: 31 dB
Damping Factor: (8 ohms, 10 Hz to 400 Hz) >200
Signal To Noise Ratio (A-weighted): >100 dB
Crosstalk (below rated power) 20 Hz to 1 kHz: -75 dB, -59 dB
Input Sensitivity: (for full rated power at 8 ohms) 0.775V or 1.4V
Input Impedance (nominal balanced, unbalanced): 20kΩ, 10kΩ
AC Line Voltage and Frequency Configurations Available: (+10%) 120V~60 Hz; 220V~50/60 Hz; 230-240V~50/60 Hz
Dimensions: 19″ x 3.5″ x 12.4″ (48.3cm x 8.9cm x 31.5cm)
Weight: 28lbs (12.7kg)
IEC Power Connector: 15A
