Crown XLS102 gives you a large LCD display so you can keep an eye on your parameters, and massive DSP capabilities to maximize the quality of your sound. In addition to high and lowpass filters, the XLS 1002 also gives you a bandpass filter on each channel for precise DSP crossover tuning, loudspeaker matching, and system EQ capabilities. Incredibly versatile, the XLS 1002 can power 2-, 4-, or 8-ohm loads and can be bridged for 4-ohm or 8-ohm mono operation.
Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable. They feature extra-thick 8mm wire, performance quality connectors, and tension-resistant stress relief.
High performance speaker cable
8mm high quality rubber outer covering
14 gauge wire
Heat shrink protected connectors
Class D amp with Crown’s ultra-efficient DriveCore technology weighs less than 11 lb (5 kg)
Higher DSP capabilities: More control; has band pass filter per channel
Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
Set sleep mode after specified time without having to press a button
Security setting disables menu buttons; menu locked/unlocked by entering combination
System reset allows factory settings to be restored
Remote power trigger
Peakx Limiters provide maximum output while protecting your speakers
XLR, 1/4″, RCA inputs provide flexibility
Integrated PureBand Crossover System for better performance and control
Efficient forced-air fans prevent excessive thermal buildup
Sensitivity: 1.4Vrms
Frequency Response: +0dB, -1dB
Signal to Noise: > 97dB (at .775Vrms sensitivity, 6dB lower)
Intermodulation Distortion: < 0.3%
Damping Factor: > 200
THD: < 0.5%
Crosstalk: At 1kHz: > 85dB, At 20kHz: > 55dB
Dimensions: 19″ (48.3 cm) x 3.5″ (8.9 cm) x 7.7″ (19.6 cm)
Weight: 8.6 lbs (3.9 kgs)