An item that has been used previously. The itme may have some signs of cosmetic wear, but is fully operational and functions as intended. Full manufacturer’s warranty and free one year extended warranty from Gigasonic.
dbx 1215 is a dual channel, 15 band 2/3 octave graphic equalizer giving you ISO frequency centers, ±12dB input gain range, and switchable 40Hz/18dB per octave low-cut filters. Other features of the 1215 include 45mm faders; selectable ±6dB or 15dB boost/cut range; XLR, barrier strip, and 1/4″ TRS connectors; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation.
Switchable boost/cut ranges of ±6 or ±15 dB
Electronically balanced/unbalanced inputs
Servo balanced/unbalanced inputs
RF filtered inputs and outputs
XLR, Barrier Strip, and 1/4″ TRS connectors
-12dB/+12dB input gain range
18dB/octave 40Hz Bessel low-cut filter
Chassis/signal ground lift capability
Internal power supply transformer
Power-off hardwire relay bypass with 2-second power-up delay
Input Connectors: 1/4″ TRS, female XLR (pin 2 hot), and barrier terminal strip
Input Type: Electronically balanced/unbalanced, RF filtered
Input Impedance: Balanced 40 kOhm, unbalanced 20 kOhm
Max Input: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
Output Connectors: 1/4″ TRS, male XLR (pin 2 hot), and barrier terminal strip
Output Type: Impedance-balanced/unbalanced, RF filtered
Output Impedance: Balanced 200 ohm, unbalanced 100 ohm
Max Output: >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth: 20Hz to 20kHz, +0.5/-1dB
Frequency Response: 50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range
Dynamic Range: 109dB; 115dB
Signal to Noise Ratio: 90dB, 97dB
THD+Nois:e <0.005%
Interchannel Crosstalk: <-80db, 20Hz to 20kHz
Bypass Switch: Bypasses the graphic equalizer section in the signal path
Low cut Switch: (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter
Range Switch: (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range
I/O Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
Indicators: EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)
Operating Voltage: 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz
Power Consumption: 24W
Power Connector: IEC receptacle
Dimensions (WXHXD): 19 x 3.5 x 7.9″ (48.3 x 8.9 x 20.1cm)
Unit Weight: 8.5 lbs. (3.9 kg)