dbx 1215 Dual Channel 15-Band Equalizer

dbx 1215 Dual Channel 15-Band Equalizer

$289.00

Out of stock

Compare
SKU: DBX1215 Category:
snap finance

Description

dbx 1215 is a dual channel, 15 band 2/3 octave graphic equalizer giving you ISO frequency centers, ±12dB input gain range, and switchable 40Hz/18dB per octave low-cut filters. Other features of the 1215 include 45mm faders; selectable ±6dB or 15dB boost/cut range; XLR, barrier strip, and 1/4″ TRS connectors; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation.

Features

Switchable boost/cut ranges of ±6 or ±15 dB

Electronically balanced/unbalanced inputs

Servo balanced/unbalanced inputs

RF filtered inputs and outputs

XLR, Barrier Strip, and 1/4″ TRS connectors

-12dB/+12dB input gain range

18dB/octave 40Hz Bessel low-cut filter

Chassis/signal ground lift capability

Internal power supply transformer

Power-off hardwire relay bypass with 2-second power-up delay

Specification

Input Connectors: 1/4″ TRS, female XLR (pin 2 hot), and barrier terminal strip

Input Type: Electronically balanced/unbalanced, RF filtered

Input Impedance: Balanced 40 kOhm, unbalanced 20 kOhm

Max Input: >+21dBu balanced or unbalanced

CMRR: >40dB, typically >55dB at 1kHz

Output Connectors: 1/4″ TRS, male XLR (pin 2 hot), and barrier terminal strip

Output Type: Impedance-balanced/unbalanced, RF filtered

Output Impedance: Balanced 200 ohm, unbalanced 100 ohm

Max Output: >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)

Bandwidth: 20Hz to 20kHz, +0.5/-1dB

Frequency Response: 50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range

Dynamic Range: 109dB; 115dB

Signal to Noise Ratio: 90dB, 97dB

THD+Nois:e <0.005%

Interchannel Crosstalk: <-80db, 20Hz to 20kHz

Bypass Switch: Bypasses the graphic equalizer section in the signal path

Low cut Switch: (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter

Range Switch: (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range

I/O Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu

Indicators: EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)

Operating Voltage: 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz

Power Consumption: 24W

Power Connector: IEC receptacle

Dimensions (WXHXD): 19 x 3.5 x 7.9″ (48.3 x 8.9 x 20.1cm)

Unit Weight: 8.5 lbs. (3.9 kg)

Additional information

Weight 14 lbs
Brands

X
[]