dbx 215s Dual Channel 15-Band Equalizer

dbx 215s Dual Channel 15-Band Equalizer

$179.00

12 in stock

Qty:
Compare
SKU: DBX215S Category:
snap finance

Description

dbx 215s  is a dual channel, 15 band, 2/3 octave graphic equalizer including ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. The 215s gives you exceptional sound and rugged reliability, from its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail.

Sure to find a home in the studio, on tour and with installed sound venues, the 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing.

Features

Dual 15-band, 1/3-octave Constant Q frequency bands

Switchable boost/cut ranges of ±6 or ±12 dB

Front panel bypass switch

±12 dB input gain range

4-segment LED ladders for monitoring output levels

XLR and TRS Inpts and Outputs

Frequency Repsonse of 50kHz

Dynamic range of greater than 108dB

Specification

Input Connectors: 1/4″ TRS, female XLR (pin 2 hot)

Input Type: Electronically balanced/unbalanced, RF filtered

Input Impedance: Balanced 40 kOhm, unbalanced 20 kOhm

Max Input: >+21dBu balanced or unbalanced

CMRR: >40dB, typically >55dB at 1kHz

Output Connectors: 1/4″ TRS, male XLR (pin 2 hot)

Output Type :Impedance-balanced/unbalanced, RF filtered

Output Impedance: Balanced 100 ohm, unbalanced 50 ohm

Max Output: >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)

Bandwidth: 20Hz to 20kHz, +0.5/-1dB

Frequency Response: 50kHz, +0.5/-3dB

Dynamic Range: Typically >112dB

Signal to Noise Ratio: Typically >95dB

THD+Noise: <0.003%

Interchannel Crosstalk: <-90db, 20Hz to 20kHz

Bypass Switch: Bypasses the graphic equalizer section in the signal path

Low cut Switch: Activates the 50Hz 12dB/octave Bessel high-pass filter

Range Switch: Selects either +/- 6dB or +/- 12dB slider boost/cut range

Operating Voltage: 100VAC-240VAC 50/60Hz

Power Consumption: 15W

Power Connector: IEC receptacle

Dimensions (WxHxD): 19 x 1.75 x 6″ (48.26 x 4.4 x 15.24cm)

Unit Weight: 4.8 lbs.(2.2 kg)

Additional information

Weight 10 lbs
Brands

X