dbx 223xs Stereo 2-Way Mono 3-Way Crossover with XLR Connectors

dbx 223xs Stereo 2-Way Mono 3-Way Crossover with XLR Connectors

$245.00

The dbx 223xs is a highly adaptable 3-way crossover that is ideal for any professional live sound system. The 223xs may operate in either 2-way stereo or 3-way mono. The 223xs has 24dB/octave Linkwitz-Riley filters for the steep crossover bands you want.

Out of stock
SKU: DBX223XS Category:
snap finance

The dbx 223xs is a dual channel stereo 2-way or mono 3-way crossover that separates the audio stream and directs the right frequencies to your loudspeaker drivers using precise filters. By sending particular frequency bands to each speaker driver, the 223xs allows your amplifiers to focus its maximum power on the usable signal, reducing distortion and improving the sound quality of your PA system.

Each output features its own volume control and phase inversion switch, as well as a 40Hz low-cut filter. For use with a subwoofer, the dbx 223xs includes a low-frequency output summing option. If you need a 4-way mono crossover, see dbx 234xs at just a slightly higher price point.

Features

  • XLR balanced ins and outs
  • Mode switch for stereo 2-way or mono 3-way operation
  • Low frequency summed (subwoofer) output
  • x10 range switch on both channels
  • 40Hz high pass (low cut) filter both channels
  • Phase reverse switch on all outputs
  • Individual level controls on all outputs
  • 24dB per octave Linkwitz-Riley filters (the professional standard
  • Stereo/Mono status LEDs indicate the selected mode
  • dbx 2 year parts and labor as standard
  • CSA NRTL/C approved
  • CE compliant

Specifications

  • Input Connectors: XLR (pin 2 hot)
  • Input Type: Electronically balanced/unbalanced, RF filtered
  • Input Impedance: Balanced >50k ohm, unbalanced >25k ohm
  • Max Input: >+22dBu balanced or unbalanced
  • CMRR: >40dB, typically >55dB at 1kHz
  • Output Connectors: XLR
  • Output Type: Impedance-balanaced/unbalanced, RF filtered
  • Output Impedance: Balanced 200 ohm, unbalanced 100 ohm
  • Max Output: >+21dBu balanced/unbalanced into 2k ohms or greater
  • Bandwidth: 20Hz to 20kHz, +/-0.5dB
  • Frequency Response: 90 kHz, +0/-3 dB
  • Signal to Noise Ratio: Ref: +4 dBu, 22 kHz measurement bandwidth
  • Signal-to-Noise (Stereo Mode): >94dB (Low Output), >91dB (High Output)
  • Signal-to-Noise (Mono Mode): >94dB (Low Output), >93dB (Mid Output), >91dB (High Output)
  • Dynamic Range: > 106 dB, unweighted, any output
  • THD+Noise: < 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz
  • Interchannel Crosstalk: < -80 dB, 20 Hz to 20 kHz
  • Crossover Frequencies (Stereo Mode): Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
  • Crossover Frequencies (Mono Mode): Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
  • Crossover Filter Type: Linkwitz-Riley, 24 dB/octave, state-variable
  • Low cut Switch: Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.
  • Phase Invert Switch :Inverts the phase at the output, one switch per output.
  • x1 / x10 Switch: Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
  • Mode Switch: Selects stereo/mono and 2/3-way operation
  • LF Sum Switch: Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2's low output phase invert LED to indicate that this output is not operational in the LF sum mode.
  • Indicators: Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output)
  • Operating Voltage: 100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ
  • Operating Temperature: 32°F to 113°F (0°C to 45°C)
  • Power Consumption: 15W
  • Power Connector: IEC receptacle
  • Dimensions (WxHxD): 19 x 1.75 x 6.9" (48.3 x 4.4 x 17.5cm)
  • Unit Weight: 3.7 lbs. (1.7 kg)
Weight 8 lbs
Brands

X
[]