dbx DriveRack PA2 Complete Loudspeaker Management System Refurbished

dbx DriveRack PA2 Complete Loudspeaker Management System Refurbished

Out of stock

An item that has been professionally restored to working order by a manufacturer or manufacturer-approved vendor. This means the product has been inspected, cleaned, and repaired to meet manufacturer specifications and is in excellent condition. Full manufacturer’s warranty and free one year extended warranty from Gigasonic.

dbx DriveRack PA2 is a complete, easy-to-use loudspeaker management system, giving you all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android®, iOS®, Mac®, or Windows® device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.


All New Setup Wizard

Streamlined AutoEQ™

All New AFS™ (Advanced Feedback Suppression)

Mobile Control (Android®, iOS®, Mac®, Windows®)

dbx Compression

Graphic EQ

8-Band Parametric EQ (adjusted when using the AutoEQ) Input

Subharmonic Synthesis

Crossover (supports full range, 2-way, and 3-way systems)

8-Band Parametric EQs (used for speaker tunings) Output

dbx Limiting

Driver Alignment Delays


Input: (2) line inputs. (1) RTA Mic input

Input Connectors:(2) Female XLR line inputs. (1) Female XLR RTA Mic input

Input Type: Electronically balanced/RF filtered

Input Impedance: >50 kohm

A/D Converter: dbx Type IV™ Conversion System

CMRR: > 45dB

Mic Preamp Phantom Power: +15VDC (RTA)

Mic Preamp Equivalent Input Noise (EIN): < -117dB, 22Hz-22kHz, 150 ohm (RTA)

Output: (6) Line Outputs

Output Connectors :Male XLR

Output Type: Electronically balanced, RF filtered

Output Impedance: 120 Ω

Max Output: +20dBu

A/D Dynamic Range: 112 dB A-weighted, 110 dB unweighted

Type IV Dynamic Range: 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW

Alignment Delay: 10ms per channel (60ms total)

Sample Rate: 48kHz

Dynamic Range: >110 dB A-weighted, >107dB unweighted

THD+Noise: 0.003% typical at +4dBu, 1kHz, 0dB input gain

Frequency Response: 20Hz – 20kHz, +/- 0.5dB

Interchannel Crosstalk: < -110 dB, -120dB typical (input-to-output: < -100 dB)

Operating Voltage: 100-120VAC 50/60 Hz – EU: 220-240 VAC 50/60 Hz

Power Consumption: 22 W

Unit Weight: 5.25 lbs. (2.4 kg)

Shipping Weight: 6.75 lbs. (3.1 kg)

Dimensions: 1.75” (H) x 5.75” (D) x 19” (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W)

D/A Dynamic Range: 112 dB A-weighted, 110dB unweighted

Related products