dbx ZonePro 641 6×4 Digital Zone Processor

dbx ZonePro 641 6×4 Digital Zone Processor

In stock
SKU: DBX641 Category:
snap finance

dbx ZonePro 641 features six inputs and four outputs, and provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.

Offering superior system sonic performance and flexibility, the 641 delivers the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability.

The 641 provides every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth® function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO® every tool is at your disposal to maximize the response of your system.


Advanced Feedback Suppression (AFS™)


Auto Gain Control



Noise Gating

Notch Filtering

Bandpass and Crossover Filters

Parametric EQ

Security Lockout

Wall Panel Control

RS-232 Control

Windows® 2000 and XP GUI

IEC, UL and CSA Approvals


Input: (6 total) (2) Switchable line or mic inputs (4) RCA Source

Input Connectors: Euroblock (Line and Mic) RCA (Source)

Input Type: Electronically balanced/RF-filtered

Input Impedance: 50k ohm balanced, >75k ohm unbalanced

Max Input: +20dBu Mic/Line, +12dBu RCA

CMRR: >40dB, typically >55dB @ 1 kHz

Mic Preamp gain: 30 to 60dB

Mic Preamp Equivalent Input Noise (EIN): <-118dB

Mic Preamp Phantom Power: 15V

Output: 4 total

Output Connectors: Euroblock

Output Type: Electronically Balanced, RF Filtered

Output Impedance: 120 ohms balanced, 60ohm unbalanced

Max Output: +20dBu

A/D Converter: dbx Type IV™ conversion system

A/D Dynamic Range: (line) >113 dB, A-weighted, >110 dB unweighted

Type IV Dynamic Range: >119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW

Digital Output: RCA 24-Bit oversampling

Digital Output Dynamic Range: >114 dB A-weighted, 110dB unweighted

Sample Rate: 48kHz

D/A Dynamic Range: 112 dB A-weighted, 109dB unweighted

Dynamic Range: >109 dB A-weighted, >106 dB unweighted

THD+Noise: 0.003% typical at +4dBu, 1kHz, 0dB gain

Frequency Response: 20Hz – 20kHz, +/-0.5dB

Interchannel Crosstalk: >80dB typical

Propagation Delay: 0.6 msec

Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz and 230VAC 50/60Hz

Power Consumption: 29 W

Unit Weight: 6.8 lbs.(3.1 kg)

Shipping Weight: 8.8 lbs. (4.0 kg)

Dimensions: 1.75” H x 5.75” D x 19” W

Weight 8.8 lbs