Earthworks SR25 condenser microphone is very light (weighing in at 0.35 lbs). This cardioid condenser microphone is designed for precision pickup in crucial recording and sound reinforcement environments. The cardioid pickup pattern featured on the Earthworks SR25 provides exceptional rejection of off-axis signal and noise due to room ambiance, instruments, monitor speakers, etc.
Except for drums and guitar amps, the Earthworks SR25 is an excellent choice for a variety of other instruments such as brass, woodwinds, acoustic guitar and more.
Item Includes
- 2 x Earthworks SR25
- 2 x Microphone Clip
- 2 x Windscreen
Earthworks SR25MP Features
Perfect for drum overheads and hi-hats, on the stage or in the studio
Matched to 0.5dB for exceptional stereo resolution
Ideal for all stereo recording placement techniques
Near-perfect cardioid polar pattern consistent across all frequencies
140 degree sweet spot sonic image of your whole kit from above
20Hz – 25kHz frequency response
High overload capacity
An SPL rating of 145dB – your attack will never distort or overload
Sanitization-Ready stainless steel. Stay clean. Stay healthy.
Requires +24-48-Volt phantom power
Handcrafted, Machined, & Assembled in the USA
Earthworks SR25MP Specs
Frequency Response: 50Hz – 25kHz ±2dB at 12 inches (30cm)
Polar Pattern: Cardioid
Sensitivity: 10mV/Pa (-40dBV/Pa)
Power Requirements: 24-48V Phantom, 10mA
Max Acoustic Input: 145dB SPL
Output: XLR (pin 2+)
Output Impedance: 65Ω balanced (between pins 2 & 3)
Min Output Load: 600Ω between pins 2 & 3
Noise: 20dB SPL equivalent (A weighted)
Dimensions L x D: 165mm x x 22mm (6.5 x .860 inches)
Weight: .35 lb. (160g) each
Earthworks SR25MP is a pair of matched Earthworks SR25’s.
