JBL CSMA 180 Commercial Series Mixer/Amplifier is designed for commercial/industrial use, and is capable of reaching 80W of peak power with 10W per channel. The unit’s front panel sports volume controls for each channel, as well as a master volume adjustment knob, bass and treble controls, and a power switch. The volume controls are illuminated so they can be seen and operated in darkened environments.
Capable of driving both eight and four Ohm loads, the amplifier can be used with 70V and 100V distributed audio systems without the need for a separate transformer. On its back panel you’ll find the mic/line inputs, unbalanced RCA inputs, speaker connections, Hi-Z and phantom power switches, and more. The unit is also equipped with a RJ45 connector for use with JBL CSR-V in-wall volume controls (available separately).
The CSMA 180 boasts such features as voice activating ducking (useful for paging over background music), priority muting for channel one’s input, and a sleep mode which automatically powers down the unit when no audible signal has been received for longer than 30 minutes. Also, with an auxiliary output, you may connect to an additional amplifier, though the master volume and tone controls will have no bearing on the resulting signal.
4 inputs with 1 output of 80-watt of power
Ideal for commercial and industrial use
Fanless, space-saving 1U design
Sleek industrial look with illuminated rings, making them easy to see and operate
Euro-block type mic/line input connectors and output connectors
Independent Bass and Treble controls for each output channel
Supports 70V and 100V distributed audio systems without the need for a separate transformer
Remote volume control capability using JBL CSR-V module and standard Ethernet cable
Priority muting
Configurable output routing
Utilizes Crown’s DriveCoreTM technology providing excellent audio performance with high efficiency
Manufactured to lead-free ROHS standards, utilizing recycled metals, and using an energy-saving powder coat process
Includes rack mounting kit
Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment
Energy Star Certified
Maximum Output Power: 80 W per channel into 4 Ohms or 8 Ohms, 1 kHz, ≤ 0.5% THD
Insertion Loss:1 dB maximum for 70 and 100 V outputs
Continuous Power: 10 W per channel
Line Output Level: 5.0 V RMS into 10 kOhms
Input Sensitivity
To obtain full rated power at 8 Ohms (or 5 VRMS to line output)
Mic Input: 3 mV RMS
Line Input: 775 mV RMS
RCA Input: 300 mV RMS
Number of Channels
Input: 4
Output: 1
Frequency Response
Measured at 2.83 V RMS into rated load impedance at any output
4/8 Ohms Output: 20 Hz – 20 kHz, ±2 dB
70 V/100 V Outputs: 80 Hz – 15 kHz ±2 dB
Line Out: 20 Hz – 20 kHz, ±1 dB
Total Harmonic Distortion (THD)
Power Amplifier Output: <0.5%, 20 Hz to 20 kHz
Line Output: 0.05% typical
Signal to Noise Ratio: > 90 dB
Nominal Input Impedance
Mic: 400 Ohms
Line: 20 kOhms (balanced)
RCA: 50 kOhms
Minimum Load Impedance
Low Impedance Output: 4 Ohms
70 V Output: 60 Ohms
100 V Output: 120 Ohms
Crosstalk: -70 dB @ 1 kHz
Controls
Front Panel:
4 x Input level rotary knob
1 x Output volume attenuator, rotary knob
1 x Power switch
1 x Bass potentiometer
1 x Treble potentiometer
Rear Panel:
1 x Hi-Z switch
1 x Phantom power switch
4 x Mic/Line selector switches
1 x VOX adjustment
Indicators
Front Panel:
4 x Input signal presence ring, green
1 x Output volume ring, green
1 x Power switch ring, green/blue
Connectors
Rear Panel:
1 x IEC power input
1 x 5-pin amplifier output
1 x 3-pin auxiliary line level output
1 x RJ45, remote volume
3 x 3-pin Euroblock Mic/Line input
3 x Dual RCA stereo input
1 x 5-pin Euroblock Priority input
Operating Temperature / Humidity: 32 to 95°F / 0 to 35°C, 95% RH (non-condensing)
Storage Temperature: -4 to 185°F / -20 to 85°C
Phantom Power: 27 VDC
AC Input: 100 to 240 VAC, 50/60 Hz
Dimensions (W x D x H): 8.6 x 11.9 x 1.7″ / 21.9 x 30.3 x 4.3 cm
Weight: Approximately 6.8 lb / 3.1 kg