JBL VMA1120 Commercial Series 120W Bluetooth-Enabled Mixer/Amplifier

JBL VMA1120 Commercial Series 120W Bluetooth-Enabled Mixer/Amplifier

$389.00

12 in stock

Qty:
Compare
SKU: JBLVMA1120 Category:
snap finance

Description

JBL VMA1120 Commercial Series Bluetooth-enabled mixer/amplifier offers flexible multi-source mixing and amplification for installation in restaurants, educational institutions, fitness centers, and retail stores. The VMA1120 features a 5-in/1-out mixer and 120W of output power. It can be installed in a standard 19″ equipment rack with the supplied rackmount kit or set on a surface such as a desk or ledge.

Features

Suitable for commercial and industrial use

Euroblock, RCA, and 1/4″ TRS input connectors

Independent bass and treble controls for each output channel

Voice-activated ducking during announcements

Remote volume control capability using optional JBL CSR-V module and Cat5e cable with RJ45 connectors

Priority muting using PTT switch closure

Configurable output routing

Barrier block output connections to drive 8 Ohms, 70V or 100V speaker systems

Media player capable of playing MP3 files from a Bluetooth device or USB drive

Specification

Output Power: 120 W (per channel into 4 Ohms or 8 Ohms, 1 kHz, ≤0.5% THD)

Insertion Loss: 70 V and 100 V Outputs: 1 dB maximum

Input Channels: 5

Output Channels: 1

Tone Controls:

Bass and Treble non-detented potentiometers on each channel

Bass: ±14 dB @ 50 Hz

Treble: ±14 dB @ 10 kHz

Input Sensitivity:

To obtain full rated power (load of 8 Ohms)

Mic Input: 5.5 mVrms

Line Input: 1.3 Vrms

RCA Input (Stereo In): 130 mVrms

Frequency Response:

Measured at 2.83 Vrms into rated load impedance at any output

4/8 Ohms Output: 20 Hz to 20 kHz, ±2 dB

70 V/100 V Outputs: 80 Hz to 15 kHz ±3 dB

Total Harmonic Distortion (THD):

Measured at 2.83 Vrms into rated load impedance at any output

Power Amp Output: <0.5%, 20 Hz to 20 kHz

Signal-to-Noise Ratio: >76 dB (reference rated power, mixer levels @ minimum, master volume @ maximum A-weighted)

Input Impedance:

Nominal

Mic: 400 Ohms

Line: 20 kOhms (balanced)

RCA: 50 kOhms

Phantom Power: 27 VDC

Crosstalk: -70 dB (reference rated power, volume at mid position, 1 kHz)

Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz

Minimum Load Impedance:

Low Impedance Output: 4 Ohms

70 V Output: 40 Ohms

100 V Output: 80 Ohms

Operating Temperature: 32 to 95°F / 0 to 35°C

Humidity: 95% RH (non-condensing)

Storage Temperature: -4 to 185°F / -20 to 85°C

Dimensions (W x D x H): 17 x 16.3 x 3.5″ / 432 x 415 x 88 mm

Weight: 20.2 lb / 9.2 kg

Additional information

Weight 26 lbs
Brands

X