Description
JBL VMA1120 Commercial Series Bluetooth-enabled mixer/amplifier offers flexible multi-source mixing and amplification for installation in restaurants, educational institutions, fitness centers, and retail stores. The VMA1120 features a 5-in/1-out mixer and 120W of output power. It can be installed in a standard 19″ equipment rack with the supplied rackmount kit or set on a surface such as a desk or ledge.
Suitable for commercial and industrial use
Euroblock, RCA, and 1/4″ TRS input connectors
Independent bass and treble controls for each output channel
Voice-activated ducking during announcements
Remote volume control capability using optional JBL CSR-V module and Cat5e cable with RJ45 connectors
Priority muting using PTT switch closure
Configurable output routing
Barrier block output connections to drive 8 Ohms, 70V or 100V speaker systems
Media player capable of playing MP3 files from a Bluetooth device or USB drive
Output Power: 120 W (per channel into 4 Ohms or 8 Ohms, 1 kHz, ≤0.5% THD)
Insertion Loss: 70 V and 100 V Outputs: 1 dB maximum
Input Channels: 5
Output Channels: 1
Tone Controls:
Bass and Treble non-detented potentiometers on each channel
Bass: ±14 dB @ 50 Hz
Treble: ±14 dB @ 10 kHz
Input Sensitivity:
To obtain full rated power (load of 8 Ohms)
Mic Input: 5.5 mVrms
Line Input: 1.3 Vrms
RCA Input (Stereo In): 130 mVrms
Frequency Response:
Measured at 2.83 Vrms into rated load impedance at any output
4/8 Ohms Output: 20 Hz to 20 kHz, ±2 dB
70 V/100 V Outputs: 80 Hz to 15 kHz ±3 dB
Total Harmonic Distortion (THD):
Measured at 2.83 Vrms into rated load impedance at any output
Power Amp Output: <0.5%, 20 Hz to 20 kHz
Signal-to-Noise Ratio: >76 dB (reference rated power, mixer levels @ minimum, master volume @ maximum A-weighted)
Input Impedance:
Nominal
Mic: 400 Ohms
Line: 20 kOhms (balanced)
RCA: 50 kOhms
Phantom Power: 27 VDC
Crosstalk: -70 dB (reference rated power, volume at mid position, 1 kHz)
Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz
Minimum Load Impedance:
Low Impedance Output: 4 Ohms
70 V Output: 40 Ohms
100 V Output: 80 Ohms
Operating Temperature: 32 to 95°F / 0 to 35°C
Humidity: 95% RH (non-condensing)
Storage Temperature: -4 to 185°F / -20 to 85°C
Dimensions (W x D x H): 17 x 16.3 x 3.5″ / 432 x 415 x 88 mm
Weight: 20.2 lb / 9.2 kg