Roland EC-10M El Cajon Mic Processor

Roland EC-10M El Cajon Mic Processor


The Roland EC-10M ElCajon Mic Processor has a condenser microphone attenuated specifically for the Cajon, as well as a microphone processor with a variety of tones activated by the musician. The Cajon’s acoustic sounds are overlaid over these tones. The user has complete control over the levels of acoustic and electronic sounds thanks to the mixing choices.

Out of stock
SKU: ROLEC10M Category:
snap finance

The Roland EC-10M ELCajon Mic Processor is a one-of-a-kind, cutting-edge creative instrument for acoustic cajons. It enhances and emphasizes your cajon sound, ensuring that your performance is always heard, whether you’re playing in small clubs or on enormous stages. Additional sounds, such as a tambourine, shaker, djembe and electronic drums, can be used in your performance. By adding an EC-10M to your percussion setup, you may transform a typical acoustic cajon into a versatile instrument. By simply connecting the specific clip-on mic to other instruments, such as a tiny cajon, an acoustic guitar, or even a cardboard box, the Roland mic processor can be used in addition to a normal acoustic cajon. With this, the acoustic cajon experience is recreated and expanded.

It’s simple to elevate your acoustic cajon performances to new heights with the Roland EC-10M. To create unusual hybrid sounds, just attach the specific clip-on mic to the cajon’s sound hole and blend the microphone processor tones with the acoustic sound. There include tambourine, surdo, splash cymbal and other percussion sounds in the 16 kits, as well as an acoustic snare drum and the Roland TR-808 snare. There are also built-in acoustic cajon tones with added ambience for enhancing the natural voice of your acoustic cajon with a powerful studio sound.


  • Easy setup - simply attach the included clip-on condenser mic to the sound hole of the acoustic cajon and start playing
  • Amplify the acoustic cajon - the EC-10M can be used as a mic preamp for the supplied microphone
  • A variety of sounds - 16 onboard kits with tones including tambourine, shaker, djembe, electronic drums, and more can be layered with your acoustic cajon
  • Multiple tones - play two different electronic sounds by slapping either the edge or head of your acoustic cajon
  • Add pedals - up to two kick-trigger pedals (Roland KT-10, KT-9, or KD-7) can be connected to play additional sounds; integrated A/B foot pads can also trigger sounds
  • Create loops and play along - a simple looper function allows recording of rhythm phrases using the onboard sounds
  • Versatile outputs - send the microphone and layered sounds to a PA mixer via two independent outputs, or mix all sounds into one mono output


  • Sound Kit Variation: 16
  • Layered Sound Contents: 2 (High, Low)
  • Controls:
    [Top Panel]
    POWER switch
    (MIC) VOLUME knob
    MODE SELECT button
    A button
    B button
    [Left Side]
    MIC GAIN knob
    ENHANCE switch
  • Indicators: KIT Number
  • Connectors:
    TRIGGER INPUT jack: 1/4-inch TRS phone type
    MIC INPUT jack: Stereo miniature type (Use included clip mic only)
    MIC/MIX OUTPUT jack (MONO): 1/4-inch phone type
    ELECTRONIC OUTPUT jack (MONO): 1/4-inch phone type
    DC IN jack
  • Power Supply:
    AC adaptor (DC5.7V)
    Rechargeable Ni-MH battery (AAA, HR03) x 4
  • Current Draw: 150 mA
  • Expected battery life under continuous use:
    Approx. 5 hours.
    * These can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use
  • Accessories:
    Clip Mic
    Owner's manual
    AC adaptor
  • Options (sold separately):
    Kicks: KD-7, KT-9, KT-10
    Stereo Split Cable: PCS-31L
  • Width: 175 mm; 6-15/16 inches
  • Depth: 135 mm; 5-3/8 inches
  • Height: 55 mm; 2-3/16 inches
  • Weight: 500 g; 1 lb. 2 oz.
Weight 4 lbs