Tascam Celesonic US-20×20 USB 3.0/2.0 Audio Interface / Digital Mixer

Tascam Celesonic US-20×20 USB 3.0/2.0 Audio Interface / Digital Mixer

$599.99
Out of stock
Qty:
SKU: TASUS20x20 Category:

Tascam Celesonic US-20×20 USB Audio Interface delivers twenty channels of analog and digital inputs and outputs. Eight of the analog inputs feature Ultra-HDDA mic preamps that provide 56 dB of gain, suitable for a wide range of mic types. Up to ten channels of digital I/O can be accessed via ADAT and S/PDIF connectors, while Wordclock is available for use with external clocks. MIDI I/O allows use with controllers and synthesizers, and sample rates up to 24-bit/192 kHz are supported.

The US-20×20 features three operation modes for maximum flexibility: audio interface, digital mixer, and eight-channel digital microphone preamp. The USB 3.0 interface uses class-compliant drivers for future-proof use with computers and tablets, while a built-in DSP mixer includes parametric EQ and compression on every channel, and a stereo reverb send for enhancing monitor mixes. The DSP mixer can store up to ten snapshots as scenes, making it easy to recall mixer settings, and can also be used as a live mixer or sub-mixer with computer control.

Features

Ultra-HDDA (High Definition Discrete Architecture) mic preamps with −125dBu EIN

Eight Ultra-HDDA micpres with XLR/TRS and connector, two TRS inputs

3 mode switching of Interface/Mic preamp/Mixer

Up to 192kHz/24-bit recording

Support for Windows and Mac

USB 3.0/2.0 computer connection (USB3.0 requires Windows 10 or OSX 10.11.2 (or later))

Connect with iPads and other iOS devices

+48V phantom power for all inputs

High-impedance inputs available

Input level specifications boast a range of 56 dB for using dynamic mics

Tough metal casing for durability

Angled design provides excellent usability on a desktop

Two standard TRS headphones output jack with 70mW + 70mW output power

Separate controls for line and headphones output volumes

MIDI input and output

Low-latency monitoring via on-board DSP mixer

DSP mixer with 4-band EQ and compression on each input channel(Can be used in Interface/Mixer mode)

On-board Reverb effect ideal for monitoring on interface mode or PA/SR on mixer mode

Patch bay allows outputs to be assigned freely(Can be used in Interface/Mixer mode)

Scenes can store DSP mixer settings (up to 10+1 scenes can be stored and named)

Ten TRS analog outputs

S/PDIF coaxial digital input/output connectors

TOS LINK optical digital multichannel input/output connectors (supporting SMUX2 and SMUX4)

BNC word clock input/output connectors

USB class compliant 2.0 support

Confirmed operation with major DAW software (SONAR, Pro Tools, Cubase, Live, Studio One, GarageBand)

RoHS certified

Rack-mount adapter included

Dedicated AC adapter included

USB2.0 cable and USB3.0 cable included

Specifications

General:

Sampling frequencies:

USB 3.0: 44.1/48/88.2/96/176.4/192 kHz

USB 2.0: 44.1/48/88.2/96 kHz

Quantization bit depth: 16/24-bit

Analogue inputs:

Mic inputs (balanced, IN1–IN2): XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)

Input impedance: 2.4 kΩ

Nominal input level (gain knob at MAX): −68 dBu (0.0003 Vrms)

Nominal input level (gain knob at MIN): −12 dBu (0.195 Vrms)

Maximum input level: +8 dBu (1.947 Vrms)

Gain range: 56 dB

Instrument inputs (unbalanced, IN1–IN2): 6.3mm (1/4″) standard TS jacks (Tip: HOT, Sleeve: GND)

Input impedance: 1 MΩ or more

Nominal input level (gain knob at MAX): −68 dBV (0.0004 Vrms)

Nominal input level (gain knob at MIN): −12 dBV (0.251 Vrms)

Maximum input level: +8 dBV (2.512 Vrms)

Gain range: 56 dB

Line inputs (balanced, IN1–IN8): 6.3mm (1/4″) standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)

Input impedance: 10 kΩ

Nominal input level (gain knob at MAX): −52 dBu (0.0019 Vrms)

Nominal input level (gain knob at MIN): +4 dBu (1.228 Vrms)

Maximum input level: +24 dBu (12.282 Vrms)

Gain range: 56 dB

Line inputs (unbalanced, LINE IN 9–10, LEVEL switch set to −10dBV): 6.3mm (1/4″) standard TS jacks (Tip: HOT, Sleeve: GND)

Input impedance: 10 kΩ

Nominal input level: −10 dBV (0.3162 Vrms)

Maximum input level: +10 dBV (3.162 Vrms)

Line inputs (balanced, LINE IN 9–10, LEVEL switch set to +4dBu): 6.3mm (1/4″) standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)

Input impedance: 10 kΩ

Nominal input level: +4 dBu (1.228 Vrms)

Maximum input level: +24 dBu (12.282 Vrms)

Analogue outputs:

Line outputs (balanced, LINE OUT 1–10): 6.3mm (1/4″) standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)

Output impedance: 100 Ω

Nominal output level: +4 dBu (1.228 Vrms)

Maximum output level: +24 dBu (12.277 Vrms)

Headphones outputs (PHONES 1/2): 6.3mm (1/4″) standard stereo jacks

Maximum output power: 70mW + 70mW (THD+N 0.1% or less, into 32 Ω load)

Frequency response (Input to PHONES 1/2 output):

At 44.1 kHz and 48 kHz: 20 Hz – 20 kHz, ±1.0 dB (JEITA)
At 88.2 kHz and 96 kHz: 20 Hz – 40 kHz, ±2.0 dB (JEITA)
At 176.4 kHz and 192 kHz: 20 Hz – 80 kHz, ±5.0 dB (JEITA)

Digital audio inputs and outputs

COAXIAL IN: RCA pin jacks

Signal format: IEC 60958-3 (S/PDIF)

Input impedance: 75 Ω

Input level: 0.5 Vpp/75 Ω

COAXIAL OUT: RCA pin jacks

Signal formats: IEC 60958-3 (S/PDIF) or IEC 60958-4 (AES/EBU), selectable on the Settings Panel

Output impedance: 75 Ω

Output level: 0.5 Vpp/75 Ω

OPTICAL (S/MUX) IN/OUT: OPTICAL (JEITA RC-5720C)

Signal format: Multi-channel optical format (supports S/MUX at 88.2 kHz, 96 kHz, 176.4 kHz or 192 kHz)

Other inputs and outputs:

USB: USB 3.0 B type

Transfer rate: USB 3.0 Super Speed (5 GBit/s)

MIDI IN: 5-pin DIN

Format: standard MIDI

MIDI OUT: 5-pin DIN

Format: standard MIDI

WORD IN: BNC (Termination on/off switch included)

Input voltage: 2.0Vpp – 5.0Vpp

Input impedance: 75 Ω ±10 %

Permitted frequency deviation during external synchronization: ±100 ppm

WORD OUT: BNC (OUT/THRU switch included)

Output voltage: 2.0 Vpp (into 75Ω load)

Output impedance: 75 Ω ±10 %

Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz

Audio performance

Mic amp EIN (equivalent input noise): −125 dBu or lower

Frequency response (Input to LINE OUT (BALANCED)):

At 44.1/48 kHz: 20 Hz – 20 kHz, ±0.5 dB (JEITA)
At 88.2/96 kHz: 20 Hz – 40 kHz, ±0.5 dB (JEITA)
At 176.4/192 kHz: 20 Hz – 80 kHz, ± 5 dB (JEITA)

S/N ratio: 104 dB or higher (MIC/LINE IN to LINE OUT, gain knob at MIN, JEITA)

Distortion: 0.004 % or less (MIC/LINE IN to LINE OUT, 1 kHz sine wave, at nominal input level and maximum output level)

Crosstalk: 100 dB or more (MIC/LINE IN to LINE OUT, 1 kHz)

Power supply and other specifications:

Power supply: DC12V AC adapter (GPE248-120200-Z)

Power consumption: 12 W

Dimensions (W×H×D):
445 mm × 59 mm × 222 mm (with standard frame attached)
483 mm × 44 mm × 222 mm (with rack mount adapters attached)

Weight: 2.8 kg

Permissible operating temperature range: 5–35 °C

Related products