Tascam iXRTP TrackPack iXR Audio Interface with TM-60 Condenser Mic

Tascam iXR is designed for recording to your iPhone and iPad at resolutions up to 24-bit/96 kHz, and is also compatible with Mac and Windows systems. It is MFi-certified and connects to your iOS devices via standard USB to Lightning or 30-pin cables without the need for an adapter.

The unit features two Ultra-HDDA mic preamps with phantom power, two direct inputs for your guitar or bass, two line inputs for your keyboards, and MIDI in/out connectors. To avoid latency, the monitor knob on the front panel allows for monitoring what is being recorded without the signal going through the computer or iOS device.

The two balanced stereo outputs let you connect your iOS device to a concert sound system, or to powered speakers. Furthermore, the unit can operate in stand-alone mode when you want to practice an instrument without recording it.

Built from rolled aluminum, the rugged body features a slim design with guards to protect the front jacks, allowing you to safely carry this unit wherever you want to record.

The iXR comes bundled with Cubasis LE multitrack recording app for iOS, and Cubase LE for Mac and Windows.

TASCAM TM-60 Studio Condenser Microphone delivers studio-quality sound in a compact package. It’s a small-diaphragm, back-electret condenser microphone, which makes it ideal for studio applications like recording guitar or percussion instruments. The cardioid polar pattern offers excellent sound rejection, so you hear more of your intended source on each recording. And since it runs on batteries, the TM-60 does not require phantom power to operate. This design choice makes it perfect for mobile recording setups.



High-resolution recording formats up to 24-bit/96 kHz

MFi-certified for direct connection with iOS devices using Lightning to USB cable (available separately)

Slim, rolled-aluminum body with Kensington lock port and protective guards

Two Ultra-HDDA (High Definition Discrete Architecture) mic preamps

Balanced XLR/TRS input jacks with +48V phantom power

Input-gain range of 57 dB for dynamic and condenser microphones

Supports direct guitar input

Offers multiple power options: USB charger, mobile battery with micro-USB output, or USB bus power from computer

Will operate in stand-alone mode when you want to hear a mic or instrument without recording it

Monitor knob on the front panel for zero-latency monitoring

Headphone-output mini jack with dedicated volume knob

Two balanced TRS output jacks for connection to powered monitors

MIDI input & output enable connection to keyboards and other MIDI devices

Supports Windows (ASIO/WDM) and Mac (Core Audio)

Compliant with USB Audio 2.0

Compatible with most major DAW software

Firmware can be updated from iOS device

Bundled with Cubase LE for Mac & Windows, and Cubasis LE for iOS


Compact condenser microphone designed for home recording

Battery option is ideal for mobile recording

Includes desktop stand and 6′ microphone cable


Audio Resolution

Sample Frequency: 44.1, 48, 88.2, 96 kHz

Bit Depth: 16-/ 24-bit

Microphone Inputs

Connectors: 2 x XLR-3-31 equivalent / 1:Gnd, 2:Hot, 3:Cold / balanced

Preamps: 2 x Ultra-HDDA (High Definition Discrete Architecture)

Input Impedance: 2.2 kOhms

Nominal Input Level:

Gain Knob at Max: -65 dBu / 0.0004 Vrms

Gain Knob at Min: -8 dBu / 0.3090 Vrms

Maximum Input Level: + 8 dBu / 1.9467 Vrms

Gain: 57 dB

Instrument Inputs

Connectors: 2 x 1/4″ (6.3 mm) TS jacks / T:Hot, S:Gnd / unbalanced

Input Impedance: 1 MOhm or more

Nominal Input Level:

Gain Knob at Max: -63 dBv / 0.0007 Vrms

Gain Knob at Min: -6 dBv / 0.5015 Vrms

Maximum Input Level: +10 dBV / 3.162 Vrms

Gain: 57 dB

Line Inputs

Connectors: 2 x 1/4″ (6.3 mm) TRS jacks / T:Hot, R:Cold, S:Gnd / balanced

(when set to Line at Line/Inst switch)

Input Impedance: 110 Ohms

Nominal Input Level:

Gain Knob at Max: -53 dBu / 0.0017 Vrms

Gain Knob at Min: +4 dBu / 1.228 Vrms

Maximum Input Level: +20 dBu / 7.75 Vrms

Gain: 57 dB

Analog Audio Outputs
Connectors: 2 x 1/4″ (6.3 mm) TRS jacks / T:Hot, R:Cold, S:Gnd / balanced
Output Impedance: 110 Ohms
Nominal Output Level: +4 dBu / 1.273 Vrms
Maximum Output Level: +20 dBu / 7.75 Vrms

Connector: 1/8″ (3.5mm) stereo-mini jack
Maximum Output Level: 18 mW + 18 mW or higher
THD+N: 0.1% or less, 32 Ohms loaded

Audio Performance
Mic Preamps: Equivalent Input Noise (EIN): -125 dBu or less / 150-Ohm termination, gain knob at max
Frequency Response:
44.1 / 48 kHz:
0 dB / -0.4 dB at 20 Hz (JEITA)
0 dB / -0.1 dB at 20 kHz (JEITA)
0 dB / -0.5 dB at 20 kHz (HP output, JEITA)
88.2 / 96 kHz:
0 dB / -0.4 dB at 20 Hz (JEITA)
0 dB / -0.25 dB at 40 kHz (JEITA)
0 dB / -2.0 dB at 40 kHz (HP output, JEITA)
S/N Ratio: 101 dB or higher, Mic/Line input to Line out, gain knob at minimum, JEITA
Distortion: 0.0025% or less, Mic/Line input to Line out, 1 kHz, at nominal input level and maximum output level, JEITA
Crosstalk: 95 dB or more, Mic/Line input to Line out, 1 kHz, JEITA

Control Input/Output Ratings
MIDI In/Out:
Connectors: 5-pin DIN
Format: Standard
Windows/Mac/Power Port:
Connector: 4-pin USB B-type
Transfer Rate: USB 2.0 high-speed, 480 Mbps
USB Port:
Connector: USB A-type
Transfer Rate: USB 2.0 high-speed, 480 Mbps

System Requirements
iOS Device Compatibility: With Lightning connector / running iOS 8 or later

Supported Operating Systems:
OS X El Capitan / 10.11 or later
OS X Yosemite / 10.10 or later
OS X Mavericks / 10.9.1 or later
OS X Mountain Lion / 10.8.4 or later
Hardware Requirements:
USB 2.0 port
CPU/Processor Speed:
2 GHz or more
2 GB or more
Supported Operating Systems:
Windows 10 32-bit
Windows 10 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows 7 32-bit SP1 or later
Windows 7 64-bit SP1 or later
Windows Vista & Windows XP are not supported
Hardware Requirements:
Windows-compatible computer with USB 2.0 port
CPU/Processor Speed:
2 GHz or faster dual-core processor
2 GB or more
Supported Audio/Midi Drivers
iOS: Core Audio for iPhone
Mac: ASIO 2.0, WDM, MIDI
Windows: Core Audio, Core MIDI



Used with Computer: USB bus power

Used with iOS Device: Needs USB power adapter, 5 V, 700 mA (available separately)

Power Consumption: 2.5 W


Operating Temperature: 41 to 95° F (5 to 35° C)

Dimensions (WxHxD): 8.26 x 1.38 x 5.53″ (210 x 35.3 x 140.7 mm), excluding protrusions

Weight: 1.45 lb (660 g)

Related products