Tascam SS-R250N features networking and can accept an optional IF-DA2 Dante card for integrating into any commercial environment. It can be used in broadcast and contractor installation markets, and records in WAV, MP3, SD/SDHC/SDXC, or USB memory formats.
Built with parallel and RS-232C serial control, along with flash start, the media recorder provides balanced and unbalanced I/O, AES/EBU, and coaxial digital I/O. These unique features make the SS-R250N memory recorder an ideal one rack-space media solution.
Balanced and unbalanced analog I/O (XLR and RCA jacks)
AES/EBU and S/PDIF digital I/O
Optional IF-DA2 Dante card allows the unit to operate on a Dante audio network
Sample rate converter on digital inputs
RS-232C Serial and 25-pin parallel control ports
Records to SD Card or USB media
Automatic file close saves file every 2 seconds to prevent data loss if power is interrupted while recording
Pre-record records the input buffer so that the start of a recording isn’t missed
Auto cue and auto ready for instant track playback
Power-on play begins playback as soon as the unit is switched on
Graphic LCD display with time, level, and menu information
Security screw to keep the SD slots covered
VSA (Variable Speed Audition) changes playback speed without changing the pitch and vice-versa
Compact 1U rack-mountable format
Ethernet connection can be used for control and file transfer
Microphone inputs with phantom power
Supports SDXC media for cards larger than 32 GB (up to 128 GB)
Redundant recording feature records program to both cards simultaneously
Relay record begins recording on the second card when the first one fills up
Free app for iOS and Android allows the recorder to be operated from a smartphone
FTP client and server functions allow recordings to be automatically uploaded to a server, or for a program to be pushed to a player from a remote location
Password protection and file encryption prevent stolen data assets
Scheduled recording triggers recording or playback at a certain time each week, etc. Can be used together with automatic uploads for instant availability
SNTP function allows the internal clock to be set using internet time servers
Link playback function allows two units to be operated simultaneously for redundant backup
Compressor and limiter on input
Auto level control monitors and adjusts the input signal
Power-on record function starts recording as soon as power is switched on
Mono mix playback function
Three user presets allow quick setting of input level, sample rate, etc.
Auto-mark function shows where a file has clipped
Dual-format recording simultaneously captures files as WAV and MP3 format
Analog Inputs
Connector:
Balanced:
3-pin XLR (1: GND, 2: HOT, 3: COLD)
Standard Input Level: +4 dBu (1.23 Vrms)
Maximum Input Level: +20 dBu (7.75 Vrms)
Minimum Input Level: -10 dBu (0.25 Vrms) or more
Input Impedance: 22 kOhms
Connector:
Unbalanced:
RCA pin jacks
Standard Input Level: -10 dBV (0.316 Vrms)
Maximum Input Level: +6 dBV (2.0 Vrms)
Minimum Input Level: -24 dBV (0.06 Vrms) or more
Input Impedance: 22 kOhms
Analog Outputs
Connector:
Balanced:
3-pin XLR (1: GND, 2: HOT, 3: COLD)
Standard Output Level: +4 dBu (1.23 Vrms)
Maximum Output Level: +20 dBu (7.75 Vrms)
Output Impedance: 100 Ohms
Connector:
Unbalanced:
RCA pin jacks
Standard Output Level: -10 dBV (0.316 Vrms)
Maximum Output Level: +6 dBV (2.0 Vrms)
Output Impedance: 200 Ohms
Headphones
Connector: 1/4″ (6.3 mm) stereo jack
Maximum Output: 45 mW + 45 mW (into 32 Ohms load, 0.1% distortion)
Digital Inputs
Connector: 3-pin XLR and RCA jacks
Formats: IEC60958-3 (S/PDIF), AES3-2003/IEC60958-4 (AES/EBU)
Input Frequency: 32 Hz to 96 kHz
Digital Outputs
Connectors: 3-pin XLR and RCA jacks
Formats: IEC60958-3 (S/PDIF), AES3-2003/IEC60958-4 (AES/EBU)
Control I/O
RS-232C: Connector: D-sub 9-pin
Protocol: RS-232C
Parallel: Connector: D-sub 25-pin
Maximum Input Voltage: +5.5 V
Minimum Input Voltage: High Level: +3.75 V
Maximum Input Voltage: Low Level: +1.25 V
Output Format: Open drain (withstand voltage 50 V, maximum 50 mA)
Maximum Output Voltage: Low Level: 0.5 V
Power: +5 V Power Maximum Current: 100 mA
Remote In (RC-SS2)
Connector: 1.8″ (3.5 mm) TRS jack
Remote
Connector: Sub-mini 2.5 mm TRS jack (for RC-20 and RC-3F)
Ethernet
Connector: RJ-45 (100Base-TX)
USB
Connector: USB A-type 4-pin
Protocol: USB 2.0 high-speed (480 Mbps)
Power & Other Parameters
Voltage: 100 to 240 VAC, 50/60 Hz
Power Consumption: 100 V: 16 W, 110 V to 240 V: 20 W
Operating Temperature Range: 41 to 95°F (5 to 35°C)
Dimensions (WxHxD): 19.0 x 1.8 x 11.9″ (482.6 x 44.5 x 301 mm)
Weight: 7.1 lb (3.2 kg)
