dbx 234s Stereo 2-3 Way, Mono 4-Way Crossover – Refurbished

dbx 234s Stereo 2-3 Way, Mono 4-Way Crossover – Refurbished

$242.25
Out of stock
Qty:
SKU: DBX234SBU Category:

It looks new. Only been used less than a few hours. Sometimes it only has been opened and tested.

dbx 234s is a dual channel, stereo 2/3-way or mono 4-way crossover. With the 234s, you’ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world’s finest processors. The 234s uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234s leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.

The 234s has all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid “click” controls to the high quality 1/4″ TRS inputs and outputs.

Features

TRS differentially balanced ins and outs

Mode switches for mono 4-way or stereo 2-way/3-way operation

Low frequency summed (subwoofer) output

x10 range switch on both channels

40Hz high pass (low cut) filter both channels

Phase reverse switch on all outputs

Individual level controls on all outputs

24dB per octave Linkwitz-Riley filters (the professional standard)

Stereo/Mono status LEDs indicate the selected mode

dbx 2 year parts and labor as standard

CSA NRTL/C approved

CE compliant

Specifications

Input Connectors: 1/4″ TRS

Input Type: Electronically balanced/unbalanced, RF filtered

Input Impedance: Balanced >50k ohm, unbalanced >25k ohm

Max Input: >+22dBu balanced or unbalanced

CMRR: >40dB, typically >55dB at 1kHz

Output Connectors: 1/4″ TRS

Output Type: Impedance-balanaced/unbalanced, RF filtered

Output Impedance: Balanced 200 ohm, unbalanced 100 ohm

Max Output: >+21dBu balanced/unbalanced into 2k ohms or greater

Bandwidth: 20Hz to 20kHz, +/-0.5dB

Frequency Response: 90 kHz, +0/-3 dB

Signal to Noise Ratio: Ref: +4 dBu, 22 kHz measurement bandwidth

Signal-to-Noise (Stereo Mode): >94dB (Low Output), >93dB (Mid Output), >90dB (High Output)

Signal-to-Noise (Mono Mode): >94dB (Low Output, Low/Mid Output); >92dB (High/Mid Output); >88dB (High Output)

Dynamic Range: > 106 dB, unweighted, any output

THD+Noise: < 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz

Interchannel Crosstalk: < -80 dB, 20 Hz to 20 kHz

Crossover Frequencies (Stereo Mode): Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High 450Hz to 9.6kHz (x10 setting)

Crossover Frequencies (Mono Mode): Low/Low-Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low-Mid/High-Mid: 450 Hz to 9.6 kHz; High-Mid/High: 450 Hz to 9.6 kHz

Crossover Filter Type: Linkwitz-Riley, 24 dB/octave, state-variable

Low cut Switch: Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.

Phase Invert Switch: Inverts the phase at the output, one switch per output.

x1 / x10 Switch: Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.

Mode Switch: Selects stereo/mono and 2/3/4-way operation

LF Sum Switch: Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2’s low output phase invert LED to indicate that this output is not operational in the LF sum mode.

Indicators: Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output)

Operating Voltage: 100-120 VAC 50/60Hz; 120 VAC 60Hz 230 VAC 50/60Hz

Operating Temperature: 32°F to 113°F (0°C to 45°C)

Power Consumption: 15W

Power Connector: IEC receptacle

Dimensions (WxHxD): 19 x 1.75 x 6.9″ (48.3 x 4.4 x 17.5cm)

<pUnit Weight: 4.0 lbs. (1.8 kg)

Related products