Audix MicroBoom MB5055 Carbon Fiber Boom System with M1255B

Audix MicroBoom MB5055 Carbon Fiber Boom System with M1255B

$599.00

2 in stock

Qty:
Compare
SKU: AUDMB5055 Category:
snap finance

Description

Audix MicroBoom MB5055 is a great all-in-one package including Audix MicroBoom-50 Boom System fitted with a M1255B Mic capsule from Audix. Used with a choice of capsules in the Audix Micros series providing a broad choice of pick-up pattern and frequency response, the MicroBoom-50 System is also a problem solver for many hard-to-reach miking applications including choir, plays, and orchestra. It is 50 inches long and is made from a strong, lightweight carbon fiber. High quality shielded cable is used internally to ensure the cleanest audio signal path between the mic and the bottom of the boom, which terminates in a mini-XLR male connector.

Designed for the MicroBoom, the stand adapter allows for total control over the angle, rotation, and position of the carbon fiber rod. A metal thumbscrew locks the rod firmly in place. The mic’s angle and position is controlled using the flexible metal gooseneck below the mic. The MicroBoom-50 offers an ultra-clean, professional, and elegant appearance on stage while offering exceptional performance and portability.

With a fully integrated preamp and detachable cable, the M1255B Miniaturized Condenser Microphone is designed with a very high sensitivity for distance miking. Applications include ceiling mount or table mount for conferencing, overhead choir miking, location recording, audience or room miking. This mic has complete immunity from RF interference caused by cell phones and GSM devices. Equipped with a cardioid capsule, the M1255B is also available with hypercardioid, omni or supercardioid (shotgun) capsules, giving the microphone the unique ability to be used in a wide variety of live, studio and broadcast applications.

Features

MicroBoom-50 Boom Mic System

  • Lightweight, rigid
  • Portable, easy to position
  • Clean, elegant appearance
  • Choice of capsules
  • Exceptional sound qualit
  • No external power adapter needed
  • Attaches to any mic stand
  • Can be used horizontally or vertically

Applications

  • Choir
  • Ensemble vocal
  • Theatre
  • Orchestral zone mik
  • Location recording
  • Presentation
  • Conference room

M1255B Miniaturized Condenser Microphone

  • Small, lightweight, low profile
  • Miniaturized integrated preamp circuitry
  • No external power adapter needed
  • 12 mm gold vapor diaphragm
  • Immune to RF interference
  • Extremely low noise, high sensitivity
  • Available with a cardioid, hypercardioid, omni or supercardioid (shotgun) capsule

Applications

  • Overhead mic for choir, group vocal
  • Acoustic instruments
  • Ambient room miking
  • Symphonic area miking
  • Speech, presentation

Supplied accessories

  • 25′ shielded mic cable. Mini-XLR(female) – XLR(male) (CBL-M25)
  • Mic stand adapter with thumbscrew and wing nut adjustments (MC-MICRO)
  • Hanging clip: (MC-HANGER)
  • Windscreen (WS1218)
Specification

.dottedline td{ border-bottom:1px dotted #ccc; line-height:140%; vertical-align:top; padding-right:5px;}

MicroBoom-50 Boom Mic System
Material rod carbon fiber
Gooseneck steel
Connectors brass
Length 50″ / 1,270mm
Diameter .20″ / 5.08mm
Connectors bottom: mini-XLR male; top: mini-XLR female
Weight 4 ounces / 111 grams (without mic or clip)
Finish non-reflective black
M1255B Miniaturized Condenser Microphone
Transducer type condenser
Frequency response 50 Hz – 19 kHz
Polar pattern Cardioid, hypercardioid, omni
Output impedance 150 ohms
Sensitivity 32 mV / Pa @ 1k
Signal/noise ratio (A-weighted) 73 dB
Equivalent noise level (A-weighted) 21 dB
Maximum SPL @ .5% THD ≥130 dB
Dynamic Range 109 dB
Power Requirements 18 – 52 V
Connector 3 pin mini-XLR(male)
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Housing Machined brass
Finish Powder coat
Weight 0.7 ounces / 0.20 g
Length 2.1 inches / 54 mm

Additional information

Weight 5 lbs
Brands

X
[]