Boss DD-3T digital delay effects pedal enables you to create different effects by delaying your guitar’s signal between 12.5 and 800 ms. These delays are segmented into three different ranges for ease of setup. You’ll find this pedal a suitable tool for adding ambience or discrete echoes.
The DD-3T features a direct output jack like the DD-3, but its been moved next to the main output jack to make connections easier. Plugging a cable into the direct out converts the main out to delay only, allowing you to send wet and dry signals to different amps for wide, immersive sounds.
Also, the DD-3T includes the same Hold function as the DD-3, but it’s been renamed “Short Loop” to reflect today’s common usage.
Pig Power is a 9V power supply with 1000 mA can power up to 10 pedals at once (PP10DC 10 Spot Daisy Chain not included), with a minimal design that requires just a single outlet. The adapter features a generous 10ft cable allows you to set up far from a power source, and 110-240c compatibility is ready for international use. The positive sleeve/negative tip works with most effects pedals on the market, including Boss PSA or ACA, Danelectro DA-1, DOD PS-200R, Dunlop ECB-03, Ibanez AC-109, Korg A30950, Morley 9V, Zoom AD-0006, and more! The power adapter is backed by a one year limited warranty.
Item Includes
- Boss DD-3T
- Owner’s manual
- Leaflet
- Alkaline battery (9 V, 6LR61)
Updated version of the industry-standard DD-3, with enhanced functionality for modern players
Ultra-easy operation for fast sound creation
Delay time of 12.5 to 800 ms, divided into three ranges for quick setup
Tap in tempos with the onboard pedal switch or an external footswitch
Short Loop setting for creating phrase loops (same as the Hold function on the original DD-3)
Direct output for sending dry and wet sounds to separate amps
Main and direct output jacks now positioned on one side of the pedal
Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
Controls:
MODE knob
TIME knob
FEEDBACK knob
E.LEVEL(Effect Level) knob
Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)
Connectors:
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DIRECT OUT jack: 1/4-inch phone type
TEMPO jack: 1/4-inch phone type
DC IN jack
Power Supply:
Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)
Current Draw: 45 mA
Expected battery life under continuous use:
Alkaline: Approx. 11.5 hours
Carbon: Approx. 3 hours
*These figures will vary depending on the actual conditions of use.
Width: 73 mm; 2-7/8 inches
Depth: 129 mm; 5-1/8 inches
Height: 59 mm; 2-3/8 inches
Weight (including battery): 420 g; 15 oz