Soundcraft GB2 is available in 16, 24, 32 channel frames to suite specific needs in live sound mixing. This model is configured with 16 input channels. 16 inputs feature microphone and line level connections, an additional 2 stereo inputs are also provided. The stereo inputs (STE1 – STE2) provide L/R stereo line level inputs and 3-pin XLR microphone inputs for stereo microphone placement when capturing vocals, instruments, ambiance, etc.
The console features 2 stereo paired group outputs enabling routing to monitors, external recorders, etc. The GB2 series implements Soundcraft’s GB30 microphone preamp and EQ, delivering the sonic quality expected of more costly consoles. Additional features include Soundcraft’s famed matrix mixer for added routing flexibility and an integrated meter bridge, enabling accurate metering.
16 Mono, 2 Stereo Input Channels
The GB2 series is available in a variety of frame configurations. This model features 16 mono and 2 stereo inputs
2 Subgroup Outputs
The GB2 series feature 2 group outputs for routing to external recorders, monitors, etc.
Matrix Mixer
The matrix output mixer provides added routing flexibility.
4 Auxiliary Sends
4 auxiliary sends provide plenty of routing to external effects, monitors, etc.
Direct Outputs
All mono inputs provide direct outputs for direct routing to recorders, mixers, etc.
Total # Of Inputs: 16 Total
Mic/Line Inputs:
16 Line: 1/4″ TRS Phone
16 Microphone: 3-pin XLR
Stereo Line Inputs: 2 Stereo: L/R Paired 1/4″ Phone Line & 3-pin XLR Microphone
In-Line Inputs/Returns: No
AUX Sends: 4 Aux Sends
AUX Returns: 4 Stereo Returns
Inserts: 1/4″ TRS Phone – Mono Inputs, Main Output and Subgroup Outputs
BUS (Group) Outputs: 2 Subgroups: Balanced 3-pin XLR
2 Trk Master I/O: Mix L/R: Stereo Paired 3-pin XLR Balanced and 1/4″ Phone
ALT I/O: ALT Stereo: L/R Stereo Paired 1/4″ Output
Monitor Outputs: Monitor: L/R Stereo Paired 1/4″ TRS Phone
EQ Section:
High Filter: 13kHz, +/- 15dB, 2nd order shelving
Hi-Mid: 550Hz – 13khz, +/- 15dB, Q=1.5
Lo-Mid: 80Hz – 1.9kHz, +/- 15dB, Q=1.5
Low Filter: 80Hz, +/- 15dB, 2nd order shelving
Solo/Mute: All Input Channels
Channel Level Control: 100mm Faders
Trim/Gain Control: Rotary Potentiometers
Phantom Power: +48V Phantom individually switched
Metering: 12-segment LED bar graphs
Frequency Response:20Hz to 20kHz <1dB
Dynamic Range: Not Specified by Manufacturer
Signal-to-Noise Ratio
Measured RMS, 22Hz to 22kHz Bandwidth
-128dBu Mic E.I.N. @ unity gain, 150 ohms source impedance
Total Harmonic Distortion (THD): <0.006%Mic sens. -30dBu, +20dBu at all outputs @ 1kHz
Power Supply:
Internal AC PSU – 85V, 270V AC, 50/60Hz universal input
Power Consumption
Less than 150W
Dimensions (WxHxD): 31.10 x 6.24 x 25.81″ (790 x 159 x 656mm)