PreSonus FP10 10x10 Firewire Recording Interface

Presonus FP10 is an all-in-one professional grade recording interface that engineers of any skill level can use.
Previously known as the Firepod, the FP10 is a complete 24-bit/96k recording system combining eight high-quality PreSonus XMAX microphone preamplifiers, 24-bit/96k sample rate conversion and, as an added bonus, the PreSonus Pro Pak Software Suite featuring Steinberg's Cubase LE 4 48-track recording software, over 25 real-time plug-in effects and over 2 GB of drum loops and samples for music production.

Hardware

The FP10 FireWire recording interface is equipped with eight PreSonus microphone preamplifiers, 24-bit/96K analog to digital conversion along with SPDIF and MIDI inputs and outputs for professional quality convenient and compact no-hassle recording.

The FP10's Class A preamps are custom-designed by PreSonus to deliver high headroom with low noise sonic performance - perfect for recording a wide variety of sources including vocals, drums, guitars, bass, piano, keyboards, guitars, synths, horns, orchestras, choirs, and more. Eight potentiometers are on the front panel to easily control the input level of each preamplifier.

Inputs one and two of the FP10 can be switched between microphone or instrument level while inputs three thru eight can be switched between microphone or line input. Phantom power (+48V) is available on every channel in groups of four. Channels 1 and 2 feature fully balanced send and return TRS connectors on the rear of the rugged metal chassis for inserting outboard dynamics, EQ and effects processors. The FP10 has eight balanced TRS line outputs as well two balanced TRS MAIN outputs as well as CUE outputs for addtional monitoring.

The FP10 also includes stereo headphone output on the front panel, as well as mix control to balance monitoring levels between mixed input and main output signals for zero-latency monitoring. Two channels of SPDIF input and output as well as MIDI input and output are also included.

Two FireWire ports are loaded on the FP10 making it possible to daisy-chain multiple FP10's together creating the possibility for adding additional inputs and outputs (with mic preamps) to your system.

Superior Analog Circuitry - XMAX Class A Preamplifiers
The FP10 starts with eight custom-designed high-voltage, discrete, XMAX Class A microphone preamplifiers. Many other companies offering recording interfaces add the cheapest possible microphone preamplifier as an afterthought to the interface. PreSonus knows that the preamplifier is a key component in the sonic quality of a recording. The job of a microphone preamplifier is to boost microphone level signals to line level so that the signal can be converted from analog to digital. This mic to line boost is generally a preamplification of over 400 times the voltage of the original mic level signal. This preamplification stage is one of the most important stages that the signal will go through before converted to digital, and is why a high performance preamplifier is important to achieving great results. A cheap "off the shelf op-amp" type mic preamp that is found in most interfaces translates into thin, noisy and harsh results.

All XMAX preamplifiers are built with the same three elements:

High Voltage - The XMAX preamplifier runs on power rails of 30V. Most off the shelf op amp based designs run on power rails of 10V to 18V. Higher voltage power rails deliver more headroom, deeper lows, smoother highs and an overall fuller sound.

Discrete - No op amps. Only transistors, resistors and capacitors. Op amps add noise, coloration and harshness to a signal. Discrete designs deliver ultra low noise and transparency.

Class A - When a circuit is running in Class A mode the circuit is always in an "on" state operating at its optimal voltage requirements. Class A mode has zero crossover distortion and delivers purer, clearer and more musical sonics than class A/B designs which are found in most op-amp circuits.

The net result of the XMAX preamp design is high headroom, low noise, wide dynamic range and wide frequency range, and most importantly, musicality and transparency - smooth highs, solid deep lows, and everything in between.

Ins and Outs
The FP10 is loaded with I/O for an extremely flexible and expandable recording system. The FP10 starts with eight Class A custom-designed PreSonus microphone preamplifiers. You can add additional preamplifiers by daisy-chaining up to three FP10's for a total fo 24 simultaneous inputs and outputs.

ProPak Software Suite
PreSonus FP10 also comes with the new ProPak Complete Software Suite, which includes more than 20 real time plug-ins, a number of virtual instruments and over 2 GB of drum loops and samples including: Steinberg - Cubase LE 4, BFD lite; Wave Arts – TrackPlug LE, MasterVerb LE, Discrete Drums and more!

Features

High-Speed FireWire (IEEE 1394) Audio Interface

Up to 96K Sampling Rate<

8 XMAX Class A Microphone Preamplifiers (+60dB gain) w/ Trim Control

8 Analog Mic/Line Inputs, 2 Instrument Inputs

8 Analog Line Outputs

S/PDIF Digital Input and Output, MIDI Input and Output

Balanced Send / Return for Channels 1 and 2

Zero Latency Monitoring

Separate Main and Cue Mix Outputs

Daisy-chain multiple FP10's for additional inputs/outputs

FREE ProPak Software Suite including Cubase LE Audio Production Software Included

Specifications

Preamp Bandwidth: 10Hz to 50kHz
Preamp Input Impedance: 1.3k Ohms
Instrument Input Impedance: 1M Ohms
Preamp THD: <0.005%
Preamp EIN: -125dB
Preamp Gain: 54dB
Preamp Send Output Impedance: 51 Ohms
Preamp Return Input Impedance: 10K Ohms
Line Trim: +/-20dB
Line Input Impedance: 10k Ohms
TRS Output Impedance: 51Ohms
TRS Main Outputs Impedance: 51 Ohms
TRS Cue Outputs Impedance: 51 Ohms
Headphone Output: 150mW/Ch 20Hz-20kHz
Phantom Power: 48V +/- 2V
Power Supply:
Ext line Transformer
Internal Switching
Analog to Digital Converters (ADC): 24-Bit / (44.1, 48, 88.2, 96kHz)
ADC Dynamic Range: 107db
DAC: 24-bit / up to 96kHz
DAC Dynamic Range: 110db
IEEE1394 Speed: 400mbps
Simultaneous record/playback channels and sample rate:
Single Unit (10 in, 10out @ 24/96K)
Two FP10's (up to 16 in, 16 out @ 24-bit/ 44.1k or 48K)
Three FP10's (up to 24 in, 24 out @ 24-bit/44.1k or 48k)

Minimum System Requirements

Windows

OS: Microsoft Windows XP
Computer: Windows compatible computer with FireWire port.
CPU/Clock: Pentium, Athlon with 900Mhz or higher (1.5GHz)
Memory(RAM): 256 MB (512MB recommended)

Macintosh

OS: MacOS X ver. 10.3.5 (Visit www.Presonus.com for MacOS 10.4 or higher)
Computer: Apple Macintosh series with on-board Firewire port.
CPU/Clock: PowerPC G4/800Mhz or higher (G4/Dual 1 GHz recommended), all Intel/Mac models
Memory(RAM): 512 MB or more