JBL PRX625 1,500-watt, Active, 2-way, Dual 15" Loudspeaker
JBL PRX625PA speaker provides powerful performance over a broad area. The PRX625 features a pair of 15" Differernt Drive neodymium woofers and a 1.5" neodymium compression tweeter to offer clear audio with a wide frquency response.
The PRX625 has an XLR/TRS mic/line combo input and an XLR loop-thru connector for connecting mic and line-level devices and instruments. It also features a DSP input section with crossover, a dbx Type IV limiter circuit, component optimization, and a selectable system EQ for flat or enhanced bass performance.
Constructed from plywood, the PRX625 not only has a durable Obsidian DuraFlex finish and powder-coated steel grille for a life of professional use but it has a set of 8 M10 fly points and an M10 pull-back point for vertical or horizontal hanging. A large glass-filled nylon handle with an ergonomic rubber grip is also provided for convenient and comfortable transportation.
Provides high output from a lightweight design
Dual 15" Differential Drive neodymium woofers and a 1.5" neodymium compression tweeter provide clear audio with a wide frequency response
Triple 500W Class-D Crown amplifiers provide a strong and efficient performance with low distortion
XLR/TRS mic/line combo input and XLR loop-thru connector for connecting mic and line-level devices and instruments
DSP input section with crossover, dbx Type IV dynamic limiter circuit, component optimization, and a selectable system EQ for choosing a flat response for clear speech, or enhanced bass for music playback
Durable enclosure is constructed from plywood with an Obsidian DuraFlex finish and a powder-coated steel grille
Set of 8 M10 fly points and an M10 pull-back point for vertical or horizontal hanging
Large glass-filled nylon handle with an ergonomic rubber grip for comfortable transport
Active or Passive: Active
Frequency Response: Flat / 55Hz - 17.5kHz ±3dB; 40Hz - 19.5kHz -10dB; Boost / 50Hz - 18kHz ±3dB; 39Hz - 19.5kHz -10dB
Amplifier: 3 x 500W Class-D Crown Amplifiers
Maximum Sound Pressure Level (SPL): 139dB
Input Impedance: 20 kOhms, Balanced; 10 kOhms, Unbalanced
Low Frequency Driver: 2 x 15" (380mm) Differential Drive Dual Voice Coil and Magnetic Gap Neodymium Woofers
High Frequency Driver: 1.5" (37.5mm) Annular Polymer Diaphragm Neodymium Compression Tweeter
Enclosure Material: Poplar Plywood with Obsidian DuraFlex Finish and Powder-Coated Steel Grille
Connectors: 1 x XLR/TRS Combo Input; 1 x XLR Loop-Thru Output; 1 x Power Input
Dimensions (HxWxD): 41.5 x 16.9 x 16.3" (1053 x 429 x 414mm)
Weight: 60 lbs (27.2kg)
Be the first to Write a Review